cancel
Showing results for 
Search instead for 
Did you mean: 
dgil04
New member
1 0 0 0
Message 1 of 2
245
Flag Post

Pavilion 27xi - Problems with monitor recognizing HDMI connection

HP Recommended
Pavilion 27xi
macOS 10.15 Catalina

Keep in mind this worked yesterday.  But today - the monitor goes to sleep because it gets "no signal" on the HDMI connection. I can't even access the monitors controls/menus

 

Thanks!

1 REPLY 1
The_Fossette
HP Support Agent
HP Support Agent
29,155 29,140 1,953 2,593
Message 2 of 2
Flag Post
HP Recommended

@dgil04,

 

Welcome to the HP Support Community!

 

I reviewed your post and I understand that you are not getting any display on the computer.

 

Don’t worry, I assure you I will try my best to get this sorted.

 

HP monitors are not supported in a Mac environment. However, newer Macs use graphics with VESA modes and can display to most HP LCD monitors. To do this, connect the monitor to the Mac while the Mac is off, and then turn on the MAC. The monitor should operate at 60Hz. The INF and software for the HP monitor are for Microsoft Windows and cannot be run in a standard MAC OS environment.

 

I hope that answers your question and you have a great day!

 

If you wish to show appreciation for my efforts, mark my post as Accept as Solution. Your feedback counts!

 

Cheers!

 

The_Fossette
I am an HP Employee

0 Kudos
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation