cancel
Showing results for 
Search instead for 
Did you mean: 
New member
2 1 0 0
Message 1 of 4
279
Flag Post
HP Recommended

Touchscreen Not Working

HP Pavilion All-in-One - 24-b114
Microsoft Windows 10 (64-bit)

I ran a Component Test upon start up. Touchscreen passed and worked perfectly. Problem is it wont work after Windows starts up and also I cant find it under Device Manager or HID Compliant Drivers. I really have no clue how to make this work

3 REPLIES 3
Highlighted
Level 6
380 380 34 71
Message 2 of 4
234
Flag Post
HP Recommended

Touchscreen Not Working

So you ran the touch test in diags and were able to touch all the orange squares ok?

If so, the you should see SOMETHING in device manager I would think. Anything disabled or not working properly should stand out from the device manager tree.

There aren't any drivers for the TS for Windows as Windows has them built in.

Reply
0 Kudos
Highlighted
New member
2 1 0 0
Message 3 of 4
130
Flag Post
HP Recommended

Touchscreen Not Working

I restarted and ran Diags again but the Touchscreen test wasn't there anymore. I went into test logs and there is a touchscreen log test with the date I ran it. 2 days ago. Any help is appreciated

Reply
0 Kudos
Highlighted
Level 6
380 380 34 71
Message 4 of 4
79
Flag Post
HP Recommended

Touchscreen Not Working

If you're not seeing the TS test as an option in diags anymore, then that means the system is NOT detecting a touch screen. This is a hardware issue. The only thing you can check without pulling it apart is that the INTERNAL USB ports ARE ENABLED in BIOS. (check under the security tab. F10 to get into BIOS)

Reply
0 Kudos
Be alert for scammers posting fake support phone numbers on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation