Use USB ports on my Z27

[Andrea25]

Hi all,

i have not found a manual on my monitor (Z27).

I don't undestand how can i use USB ports on the rear of monitor, The USB Hub port is not present and in the HP web site i have not see the User manual.

Thanks

Andrea

[CF4]

Hi

Is it this one?

https://support.hp.com/gb-en/product/HP-Z-Display-Z27i-27-inch-IPS-LED-Backlit-Monitor/5367293/model...

Connecting USB Devices
USB connectors are used to connect devices such as a digital camera, USB keyboard, or USB
mouse. There are four downstream USB ports on the monitor (two on the rear and two on the side).
NOTE:  You must connect the USB hub cable from the monitor to the computer to enable the USB
ports on the monitor.

[Andrea25]

I have not USB HUB port.

My model is HP Z27n G2

thanks

[CF4]

https://support.hp.com/gb-en/product/hp-z27n-g2-27-inch-display/18007179/model/18007180/troubleshoot...

USB ports	(2) USB 3.0 Type-A (1) USB Type-C
Other	(1) Audio-out jack (headphone) (1) Power connector port

(1) DisplayPort (DP) 1.2 (input)

(1) DisplayPort (DP) 1.2 (output)

(1) HDMI 1.4

(1) VGA

[Andrea25]

ok,

but how can i use that port?

i want connect 1wire  connection to PC and .. ti monitor the keyboard

[CF4]

Hi

In the box was suppposed to be

USB 3.1 Type-C to Type-A cable 1.8 m (5.90 ft) which would connect from the Monitor to the System box to run alongside your DisplayPort (DP) cable, 1.8 m (5.90 ft)

[Andrea25]

Sorry but i don't understand.

I have a loto of USB port in my monito but i try to connect, USB-C with PC and USB to monito but USB port on monitor not working.

I connect a USB key but it  don't work

thanks

[CF4]

Hi

Sorry can't help. The spec only lists one.

This C type should connect using the cable supplied to the system box.