unable to switch to hdmi input mode on desktop

[psychi]

I am not able to change the input on my hp al in one desktop from pc mode to hdmi mode, need help

[Nal_NR]

Hi @psychi,

Welcome to the HP Support Community. 

I'd be glad to help you! 

To switch from PC mode to HDMI mode on your HP All-in-One desktop, follow these steps. Many HP All-in-One PCs support input switching between the computer's internal display and an external device connected via HDMI, such as a gaming console or another computer. However, the method can vary slightly depending on the model, so here's a general guide:

1. Check for the Input/Source Switch Button

• Many HP All-in-One models have a dedicated button or a function key to switch inputs between PC mode and HDMI mode.
• Look for a button on the side or back of the monitor labeled Input or Source.
  • If you find it, press it, and it should toggle between the PC's internal display and HDMI input.

2. Use the On-Screen Menu

• If there is no physical button, your All-in-One PC might use an on-screen menu (OSD) to switch the input:
  1. Turn on the external device connected via HDMI (such as a gaming console or Blu-ray player).
  2. Press the Menu or Settings button on your All-in-One's display (this is usually a physical button near the bottom or side of the screen).
  3. Use the arrow buttons to navigate through the menu and find the Input or Source settings.
  4. Select the HDMI input option and confirm.

3. Use the Function Keys

• Some HP All-in-One models allow you to switch inputs using function keys:
  1. Press F9 or F10 (depending on your model) to switch between inputs.
  2. If this doesn’t work, try holding down the Fn key and pressing F9 or F10.

4. Update Drivers and Software

• If you cannot find any options for switching inputs, ensure that your PC is running the latest drivers and firmware:
  1. Go to HP Support and check for the latest display drivers and BIOS updates for your model.
  2. Install any updates and restart your PC.

5. Check HDMI Cable and Port

• Ensure that the HDMI cable is properly connected to the HDMI input port on your All-in-One and the external device.
• Try using another HDMI cable or connect a different device to the HDMI port to rule out any issues with the cable or the device itself.

6. Confirm if Your Model Supports HDMI Input

• Some HP All-in-One models only have HDMI output (to connect an external monitor), not HDMI input. Check your model’s specifications on the HP website to verify whether your All-in-One supports HDMI input.

Hope this helps! Keep me posted for further assistance

Please mark this post as “Accepted Solution” if the issue is resolved and if you feel this reply was helpful click “Yes”.