Does Baker (Rev A/M11) Motherboard have internal USB header/connector?

[mrodriguez1]

Trying to install a TP-link AX3000 bluetooth card. It comes with an F_USB connector. I can't find a connector on the motherboard or info on whether the board has one. Can someone confirm this I can connect the cable one way or the other?

Thank you

[BeemerBiker]

---

@mrodriguez1 wrote:

Trying to install a TP-link AX3000 bluetooth card. It comes with an F_USB connector. I can't find a connector on the motherboard or info on whether the board has one. Can someone confirm this I can connect the cable one way or the other?

Thank you

---

Your Baker A/M11 is shown nicely here

https://www.ebay.com/itm/125378971289

I was unable to spot a USB header.  I did see a slot for a WLAN  and an m.2 card that takes 2 antennas is in it

Is the slot defective where you cannot upgrade to WiFi 6 / Bluetooth 5 ?

It is possible to enable Bluetooth on your PCIe addin card. 

There are cables can can be routed back inside the case to connect to the AX3000 cable.  This one should work fine.

i do not have any HP systems with WLAN and can only guess as to which M.2 can give you Wi-Fi 6 and Bluetooth 5.x

Our expert @Paul_Tikkanen probably know which ones will work, if any.

[Paul_Tikkanen]

Hi, @mrodriguez1 

The Intel AX200 non-vPro should work.

This part number which can be found on eBay.  Search by the HP part number, not the model of the Wi-Fi card.

Intel Wi-Fi 6 AX200 ax 2×2 + Bluetooth 5.0 MU-MIMO M.2 2230 non-vPro   HP part # L35282-005.

If you want to experiment with a Wi-Fi 6E card, then try this model:

Intel Wi-Fi 6 AX210 + Bluetooth 5.2 (non-vPro)  HP part # M27269-005