Wireless and connected networks are not working

[PhoenixDown]

About two weeks ago my wifi went out without warning or reason and is not connecting. I went through dozens of troubleshooting steps to no avail. Decided to plug in directly to see if i could get online and now the network icon is showing "limited". Went through a number of troubleshooting steps plus recovery of the computer and still no luck with networking.

[Lil_Boy_Blue]

Hi

You need 2 sets of working hardware, 4 sets of 'IP' addresses.

Your router should have a Gateway Address, mine is 192.168.0.1 and my IP address is in the same range.

So, basics are a Command Line sequence, either typed individually, or batched up.

Copy, Paste and Save in Notepad, as LBB2Z.bat and double click to run.
Post anything non-personal, but relevant please.

@ECHO OFF
getmac
PAUSE
netsh wlan show interfaces
PAUSE
netsh wlan show drivers
PAUSE
netsh wlan show profiles
PAUSE

Some examples....

C:\>getmac

Physical Address Transport Name
=================== ==========================================================
48-48-48-48-48-27 \Device\Tcpip_{FE8C17AA-1613-4F0A-9BBF-4344B97CB399}
B0-5A-DA-DE-84-28 Media disconnected
48-48-48-48-48-28 Media disconnected

Then I would ping...   127.0.0.1   -  192.168.0.1    and  13.107.4.52

C:\>ping 127.0.0.1

Pinging 127.0.0.1 with 32 bytes of data:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms

post the results please.