cancel
Showing results for 
Search instead for 
Did you mean: 
  • ×
    Information
    Need Windows 11 help?
    Check documents and videos on compatibility, FAQs, upgrade information and available fixes.Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents and videos on compatibility, FAQs, upgrade information and available fixes.Windows 11 Support Center.
  • post a message
Check out our WINDOWS 11 Support Center info about: OPTIMIZATION, KNOWN ISSUES, FAQs, VIDEOS AND MORE.
jstef4
Level 3
23 1 2 1
Message 1 of 2
335
Flag Post

Solved!

Wireless connection

HP Recommended
HP Envy 700 200 Z E6S60AV#ABA
Microsoft Windows 10 (64-bit)

My desktop computer is connected to a Wifi Actiontec (Verizon) router via ethernet cable through a Qualcom   Atheros network adapter.

The computer is provided with a  Ralink RT3290 802.11bgn  Wifi adapter.

If I want to change from Ethernet to wireless what should I do?

For ex. disconnect the ethernet and then configure Ralink.

Please advise

 

1 ACCEPTED SOLUTION

Accepted Solutions
banhien
Level 20
Level 20
98,704 37,746 12,822 27,064
Message 2 of 2
Flag Post
HP Recommended

@jstef4 

 

You can connect both wired and wireless to same router at the same time. Or you simply pull the LAN cable out and connect wifi to router using following steps:

 

(a) Click the wireless icon at the bottom right corner,

(b) Select you SSID on the list (because it can see your neighbor SSID's too),

(c) Enter your network password (PIN, key) and Click Connect (remember to tick "Auto connect").

 

Regard.

BH
***
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.




>

View solution in original post

Was this reply helpful? Yes No
1 REPLY 1
banhien
Level 20
Level 20
98,704 37,746 12,822 27,064
Message 2 of 2
Flag Post
HP Recommended

@jstef4 

 

You can connect both wired and wireless to same router at the same time. Or you simply pull the LAN cable out and connect wifi to router using following steps:

 

(a) Click the wireless icon at the bottom right corner,

(b) Select you SSID on the list (because it can see your neighbor SSID's too),

(c) Enter your network password (PIN, key) and Click Connect (remember to tick "Auto connect").

 

Regard.

BH
***
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.




>
Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation