Computer will not boot

[golden1737]

The computer continually loops into sequences that say the computer ran into a problem and and will restart and correct the error. It restarts and then goes into diagnosis and automatic repair. It then says it did not start correctly and will restart. It stays in this loop and nothing else happens.

How do we correct this and get past it?

Thank you for your help!

[Jeet_singh]

Hi @golden1737,

Thank you for showing your interest in HP Support Forums. It is a great place to find the help you need, from other users, HP experts, and other support personnel. For you to have the best experience on the HP forum, you could also visit our HP Forums Guide for the First Time Here? Learn How to Post and More.

As I understand the computer is powering on, however, doesn't boot into windows, And it turns off after a few seconds after it's turned on,

Please perform the below steps:

Perform a hard reset (Remove all cables from the AIO, hold the power button in for 30 seconds, reconnect the cables and restart the PC)

If the issue persists, Access the BIOS by tapping on F10 during the restart and if the computer restarts while you are in the BIOS screen, it would confirm a hardware failure and you need to contact HP for a hardware service.

However, if it doesn't turn off while you are in BIOS, restart the computer and Tap on F11, to attempt a system restore followed by a system recovery to resolve the issue (follow the screen instructions for details).

For more details, please follow the steps suggested in the support document for - HP PCs - The Computer Restarts Unexpectedly (Windows 10, 😎 - Click here

Keep me posted for further assistance.

I hope you have a good day ahead,

And Feel free to ask your queries as this forum has some of the best people in the world available and ready to help.

Regards,