cancel

Note on archived topics.

This topic has been archived. Information and links in this thread may no longer be available or relevant.
If you have a question create a new topic by clicking here and select the appropriate board.
Flauyven Top Student
Top Student
3 2 0 1
Message 1 of 1
190
Flag Post
HP Recommended

Error beeps from DisplayPort

ProDesk 600 G3 SFF
Microsoft Windows 10 (64-bit)

I have several ProDesk 600 G3 Small Form Factor desktops that, when a DisplayPort Adapter is plugged into them, they immediately begin beeping in a pattern that indicates 4.2, a "processor over temperature condition" and, after a power off, I get a POST Error that states, 

 

"System Temperature

 

90D-System Temperature

The System BIOS has dettected your machine was previously shut down to avoid overheating.

Overheating may occur if the cooling vents are blocked or the operating temperature exceeds the system specifications.

The machine should return to normal operation once the situation is resolved."

 

Any ideas as to what it might be about the DisplayPort adapter that would cause an immediate overheat?

0 Kudos

Note on archived topics.

This topic has been archived. Information and links in this thread may no longer be available or relevant.
If you have a question create a new topic by clicking here and select the appropriate board.
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation