cancel
Showing results for 
Search instead for 
Did you mean: 
ArchivedThis topic has been archived. Information and links in this thread may no longer be available or relevant. If you have a question create a new topic by clicking here and select the appropriate board.
MRansom324
New member
2 0 0 0
Message 1 of 2
139
Flag Post

P6267C will not illuminate monitor.

HP Recommended
Pavillion P6267C
Microsoft Windows 10 (64-bit)

Tehe HP  2509m monitor is black.  By turning off & back on monitor power switch, briefly illuminates & shows DVI "active" & VGS "no signal".  re-booting does not solve.  Blue power switch lights on both PC & monitor stay blue, so unit is not going into hibernation.  I unplugged & re-plugged related cables, without improvement.

0 Kudos
1 REPLY 1
TheOldMan
Level 15
Level 15
10,657 10,653 994 3,005
Message 2 of 2
Flag Post
HP Recommended

Well that be a sign of the video card failing.  From the SUPPORT PAGE, that PC has a ATI Redeon HD4350.  Try removing the card and connect the monitor to the onboard graphics.  That will tell if the card has failed or not.


I'm not an HP employee.
Did this message answer your question? Please indicate below as an Accepted Solution!
Did you find this message useful? Click on the thumbs up to give Kudos! " >.

0 Kudos
ArchivedThis topic has been archived. Information and links in this thread may no longer be available or relevant. If you have a question create a new topic by clicking here and select the appropriate board.
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation