cancel
Showing results for 
Search instead for 
Did you mean: 
  • ×
    Information
    Fix Windows 10 Update Issues

    Resolve Windows 10 or update issues on HP computer or printer– Click Here

  • post a message
  • ×
    Information
    Fix Windows 10 Update Issues

    Resolve Windows 10 or update issues on HP computer or printer– Click Here

  • post a message
This topic has been archived. Information and links in this thread may no longer be available or relevant. If you have a question create a new topic by clicking here and select the appropriate board.
Highlighted
Level 2
22 21 0 2
Message 31 of 38
Flag Post
HP Recommended

Okay, I fixed it today!

 

Start your compter and let it boot.  Now take a strong flashlight at place it at an angle and see if you can see anything on the screen, it might take a dark room and getting the flash right just right.  It took me a few minuites before I saw something.

 

If this is the case then the inverter is bad.  Order part number PWB-IV18182T/C1-E-HF for the HP Touchsmart 310 PC.  make sure that the pins line up for your modle as there are difernent configurations.  My 310 has the phugs that are 90 degrees to the board and there are others that point to each end.  You will need to look at yours to be sure.  I found mine on ebay for about $35.

 

Good luck, hope this helps!

 
0 Kudos
Highlighted
Level 2
22 21 0 2
Message 32 of 38
Flag Post
HP Recommended

Okay, I fixed it today!

 

Start your compter and let it boot.  Now take a strong flashlight at place it at an angle and see if you can see anything on the screen, it might take a dark room and getting the flash right just right.  It took me a few minuites before I saw something.

 

If this is the case then the inverter is bad.  Order part number PWB-IV18182T/C1-E-HF for the HP Touchsmart 310 PC.  make sure that the pins line up for your modle as there are difernent configurations.  My 310 has the phugs that are 90 degrees to the board and there are others that point to each end.  You will need to look at yours to be sure.  I found mine on ebay for about $35.

 

Good luck, hope this helps!

 
0 Kudos
Highlighted
Level 2
22 21 0 2
Message 33 of 38
Flag Post
HP Recommended

Okay, I fixed it today!

 

Start your compter and let it boot.  Now take a strong flashlight at place it at an angle and see if you can see anything on the screen, it might take a dark room and getting the flash right just right.  It took me a few minuites before I saw something.

 

If this is the case then the inverter is bad.  Order part number PWB-IV18182T/C1-E-HF for the HP Touchsmart 310 PC.  make sure that the pins line up for your modle as there are difernent configurations.  My 310 has the phugs that are 90 degrees to the board and there are others that point to each end.  You will need to look at yours to be sure.  I found mine on ebay for about $35.

 

Good luck, hope this helps!

0 Kudos
Highlighted
Level 2
22 21 0 2
Message 34 of 38
Flag Post
HP Recommended

Okay, I fixed it today!

 

Start your compter and let it boot.  Now take a strong flashlight at place it at an angle and see if you can see anything on the screen, it might take a dark room and getting the flash right just right.  It took me a few minuites before I saw something.

 

If this is the case then the inverter is bad.  Order part number PWB-IV18182T/C1-E-HF for the HP Touchsmart 310 PC.  Make sure that the pins line up for your modle as there are difernent configurations.  My 310 has the phugs that are 90 degrees to the board and there are others that point to each end.  You will need to look at yours to be sure.  I found mine on ebay for about $35.

 

Good luck, hope this helps!

0 Kudos
Highlighted
Level 2
22 21 0 2
Message 35 of 38
Flag Post
HP Recommended

Okay, I fixed it today!

 

Start your compter and let it boot.  Now take a strong flashlight at place it at an angle and see if you can see anything on the screen, it might take a dark room and getting the flash right just right.  It took me a few minuites before I saw something.

 

If this is the case then the inverter is bad.  order part number PWB-IV18182T/C1-E-HF for the HP Touchsmart 310 PC.  make sure that the pins line up for your modle as there are difernent configurations.  My 310 has the phugs that are 90 degrees to the board and there are others that point to each end.  You will need to look at yours to be sure.  I found mine on ebay for about $35.

 

Good luck, hope this helps!

 
0 Kudos
Highlighted
Level 2
22 21 0 2
Message 36 of 38
Flag Post
HP Recommended

Okay, I fixed it today!

 

Start your compter and let it boot.  Now take a strong flashlight at place it at an angle and see if you can see anything on the screen, it might take a dark room and getting the flash right just right.  It took me a few minuites before I saw something.

 

If this is the case then the inverter is bad.  order part number PWB-IV18182T/C1-E-HF for the HP Touchsmart 310 PC.  make sure that the pins line up for your modle as there are difernent configurations.  My 310 has the phugs that are 90 degrees to the board and there are others that point to each end.  You will need to look at yours to be sure.  I found mine on ebay for about $35.

 

Good luck, hope this helps!

 
0 Kudos
Highlighted
New member
2 2 0 0
Message 37 of 38
Flag Post
HP Recommended

hi, did the processor fix your issue i have done 3 of these now with the same problem and each time it was the processor had failed. regards andy

0 Kudos
Highlighted
Level 2
22 21 0 2
Message 38 of 38
Flag Post
HP Recommended

No, I replaced the invertor at all is well.

0 Kudos
This topic has been archived. Information and links in this thread may no longer be available or relevant. If you have a question create a new topic by clicking here and select the appropriate board.
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation