• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
From questions to kudos — grow your reputation as a tech expert with HP Support! Click here to sign up.
Archived This topic has been archived. Information and links in this thread may no longer be available or relevant. If you have a question create a new topic by clicking here and select the appropriate board.

‎08-22-2016 06:11 PM - edited ‎08-22-2016 06:21 PM

HP Recommended

Okay, I fixed it today!

 

Start your compter and let it boot.  Now take a strong flashlight at place it at an angle and see if you can see anything on the screen, it might take a dark room and getting the flash right just right.  It took me a few minuites before I saw something.

 

If this is the case then the inverter is bad.  Order part number PWB-IV18182T/C1-E-HF for the HP Touchsmart 310 PC.  make sure that the pins line up for your modle as there are difernent configurations.  My 310 has the phugs that are 90 degrees to the board and there are others that point to each end.  You will need to look at yours to be sure.  I found mine on ebay for about $35.

 

Good luck, hope this helps!

 

‎08-22-2016 06:13 PM - edited ‎08-22-2016 06:21 PM

HP Recommended

Okay, I fixed it today!

 

Start your compter and let it boot.  Now take a strong flashlight at place it at an angle and see if you can see anything on the screen, it might take a dark room and getting the flash right just right.  It took me a few minuites before I saw something.

 

If this is the case then the inverter is bad.  Order part number PWB-IV18182T/C1-E-HF for the HP Touchsmart 310 PC.  make sure that the pins line up for your modle as there are difernent configurations.  My 310 has the phugs that are 90 degrees to the board and there are others that point to each end.  You will need to look at yours to be sure.  I found mine on ebay for about $35.

 

Good luck, hope this helps!

 

‎08-22-2016 06:15 PM - edited ‎08-22-2016 06:21 PM

HP Recommended

Okay, I fixed it today!

 

Start your compter and let it boot.  Now take a strong flashlight at place it at an angle and see if you can see anything on the screen, it might take a dark room and getting the flash right just right.  It took me a few minuites before I saw something.

 

If this is the case then the inverter is bad.  Order part number PWB-IV18182T/C1-E-HF for the HP Touchsmart 310 PC.  make sure that the pins line up for your modle as there are difernent configurations.  My 310 has the phugs that are 90 degrees to the board and there are others that point to each end.  You will need to look at yours to be sure.  I found mine on ebay for about $35.

 

Good luck, hope this helps!

‎08-22-2016 06:19 PM - edited ‎08-22-2016 06:23 PM

HP Recommended

Okay, I fixed it today!

 

Start your compter and let it boot.  Now take a strong flashlight at place it at an angle and see if you can see anything on the screen, it might take a dark room and getting the flash right just right.  It took me a few minuites before I saw something.

 

If this is the case then the inverter is bad.  Order part number PWB-IV18182T/C1-E-HF for the HP Touchsmart 310 PC.  Make sure that the pins line up for your modle as there are difernent configurations.  My 310 has the phugs that are 90 degrees to the board and there are others that point to each end.  You will need to look at yours to be sure.  I found mine on ebay for about $35.

 

Good luck, hope this helps!

‎08-22-2016 06:31 PM

HP Recommended

Okay, I fixed it today!

 

Start your compter and let it boot.  Now take a strong flashlight at place it at an angle and see if you can see anything on the screen, it might take a dark room and getting the flash right just right.  It took me a few minuites before I saw something.

 

If this is the case then the inverter is bad.  order part number PWB-IV18182T/C1-E-HF for the HP Touchsmart 310 PC.  make sure that the pins line up for your modle as there are difernent configurations.  My 310 has the phugs that are 90 degrees to the board and there are others that point to each end.  You will need to look at yours to be sure.  I found mine on ebay for about $35.

 

Good luck, hope this helps!

 

‎08-22-2016 06:32 PM

HP Recommended

Okay, I fixed it today!

 

Start your compter and let it boot.  Now take a strong flashlight at place it at an angle and see if you can see anything on the screen, it might take a dark room and getting the flash right just right.  It took me a few minuites before I saw something.

 

If this is the case then the inverter is bad.  order part number PWB-IV18182T/C1-E-HF for the HP Touchsmart 310 PC.  make sure that the pins line up for your modle as there are difernent configurations.  My 310 has the phugs that are 90 degrees to the board and there are others that point to each end.  You will need to look at yours to be sure.  I found mine on ebay for about $35.

 

Good luck, hope this helps!

 

‎08-23-2016 01:47 AM

HP Recommended

hi, did the processor fix your issue i have done 3 of these now with the same problem and each time it was the processor had failed. regards andy

‎08-23-2016 06:01 PM

HP Recommended

No, I replaced the invertor at all is well.

Archived This topic has been archived. Information and links in this thread may no longer be available or relevant. If you have a question create a new topic by clicking here and select the appropriate board.
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.
Didn't find what you were looking for? Ask the community
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.