-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Archived Topics
- Desktops (Archived)
- USB 3.0 BIOS Driver Support - Windows 10

Create an account on the HP Community to personalize your profile and ask a question

11-02-2015 07:41 AM
Hi
Trying to get WIndows 10 to recognize the front USB 3.0 ports. Back USB 3.0 ports are recognized as USB 2.0
USB 2.0 ports work fine
Notice in the BIOS the option: "USB 3.0 BIOS Driver Support"
Should it be Enable or Dissable for Widnows 10?
Thanks
Solved! Go to Solution.
Accepted Solutions
11-24-2015 10:14 AM - edited 11-24-2015 10:17 AM
Clear the CMOS and then reinstall the Intel chipset.
Station drivers web site I have used this site but mainly to update firmware but not for drivers.
11-02-2015 01:16 PM
Thanks for your response
I tested both -
Enabled: Front USB 3.0 port do not work. Back USB 3.0 ports works as USB 2.0. All ports are present in "Device Manager" list. No USB 3.0 reference (Like "USB 3.0 Root Hub") in "Device Manager" list
DIssable: All (front and back) USB 3.0 ports work as USB 2.0 por. No USB 3.0 reference (Like "USB 3.0 Root Hub") in "Device Manager" list
USB 2.0 ports always OK
BIOS ROM FIrmware 2.65 Rev A
Any help always appreciated
Thanks
11-23-2015 08:18 AM
11-23-2015 06:54 PM
Just curious, but when you open Device Manager, Universal Serial Bus controllers, what does it say about the USB 3.0 Host Controller.
Asking because mine says "Renesas..." -- which is how (1) I found out it was made by Sony, and (2) was able to find current drivers and firmware (newer than that furnished by Gigabyte) from the station-drivers website.
I am a volunteer and I do not work for, nor represent, HP
11-23-2015 09:16 PM
