• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
The HP Community is where owners of HP products, like you, volunteer to help each other find solutions.
Locked

‎02-12-2022 06:47 AM

HP Recommended
Product: OMEN 30L Desktop PC GT13-1000a (207P7AV)
Operating System: Microsoft Windows 11

The memory module specs list CL between 15 and 19, with freq between 2666MHz and 3733MHz. As you can see below, I'm getting CL of 22 at a slow 1600MHZ! Am I looking at this wrong? If not, can it be fixed? I looked in BIOS and didn't find any adjustments.

 

HikerBoricua_0-1644673337468.png

 

Category:
1 ACCEPTED SOLUTION

Accepted Solutions

‎02-12-2022 08:40 AM - edited ‎02-12-2022 09:11 AM

HP Recommended

hi

see

FURY Plug N Play memory will run in DDR4 systems up to the speed allowed by the manufacturer’s system BIOS. PnP cannot increase the system memory speed faster than is allowed by the manufacturer’s BIOS. FURY Plug N Play DDR4 products support XMP 2.0 specifications so overclocking can also be achieved by enabling the built-in XMP Profile.

Your motherboard does not fully support this type of module!
There is not much possibility, especially if the motherboard does not have the function like here:

Solved: Re: Overclocking RAM in the BIOS - HP Support Community - 8166347

your reference does not identify the model of the computer, and its motherboard

https://support.hp.com/us-en/product/omen-30l-desktop-pc-gt13-1000a/2100404772/model/2100404775/prod...

 

 

Hana

Memory upgrade information

  • Dual channel (2 DIMMs per channel) memory architecture

  • Four DDR4 UDIMM (288-pin) sockets

  • Supports up to PC4-25600 (DDR4-3200)

  • Supports 8 GB and 16 GB DDR4 UDIMMs

  • Supports up to 4 GB on 32-bit systems

    Note:

    32-bit systems cannot address a full 4.0 GB of memory.

  • Supports up to 64 GB (unbuffered) with 16 GB DIMMs on 64-bit computers

Oasis motherboard specifications

Memory upgrade information

  • Dual channel (2 DIMMs per channel) memory architecture

  • Four DDR4 UDIMM (288-pin) sockets

  • Supports PC4-25600 (DDR4-3200)

  • Supports 8 GB and 16 GB DDR4 UDIMMs

  • Supports up to 4 GB on 32-bit systems

    Note:

    32-bit systems cannot address a full 4.0 GB of memory.

  • Supports up to 64 GB (unbuffered) with 16 GB DIMMs on 64-bit computers

OasisOC motherboard specifications

 

Memory upgrade information

  • Dual channel (2 DIMMs per channel) memory architecture

  • Four DDR4 UDIMM (288-pin) sockets

  • Supports PC4-25600 (DDR4-3200)

  • Supports 8 GB and 16 GB DDR4 UDIMMs

  • Supports up to 4 GB on 32-bit systems

    Note:

    32-bit systems cannot address a full 4.0 GB of memory.

  • Supports up to 64 GB (unbuffered) with 16 GB DIMMs on 64-bit computers

[edit] so for me it s like that :

 

memooire vitesse.gif

 

Capture d’écran 2022-02-12 171030.png

--------------------------------------------- Signature ---------------------------------------------
was this reply helpful , or just say thank you ? Click on the yes button

Please remember to mark the answers this can help other users
please click on the accept as solution button if message provided an answer to the problem




Desktop-Knowledge-Base
Windows 11 22h2 inside , user

------------------------------------------------------------------------------------------------------------

View solution in original post

1 person found this reply helpful
Was this reply helpful? Yes No
3 REPLIES 3

‎02-12-2022 08:40 AM - edited ‎02-12-2022 09:11 AM

HP Recommended

hi

see

FURY Plug N Play memory will run in DDR4 systems up to the speed allowed by the manufacturer’s system BIOS. PnP cannot increase the system memory speed faster than is allowed by the manufacturer’s BIOS. FURY Plug N Play DDR4 products support XMP 2.0 specifications so overclocking can also be achieved by enabling the built-in XMP Profile.

Your motherboard does not fully support this type of module!
There is not much possibility, especially if the motherboard does not have the function like here:

Solved: Re: Overclocking RAM in the BIOS - HP Support Community - 8166347

your reference does not identify the model of the computer, and its motherboard

https://support.hp.com/us-en/product/omen-30l-desktop-pc-gt13-1000a/2100404772/model/2100404775/prod...

 

 

Hana

Memory upgrade information

  • Dual channel (2 DIMMs per channel) memory architecture

  • Four DDR4 UDIMM (288-pin) sockets

  • Supports up to PC4-25600 (DDR4-3200)

  • Supports 8 GB and 16 GB DDR4 UDIMMs

  • Supports up to 4 GB on 32-bit systems

    Note:

    32-bit systems cannot address a full 4.0 GB of memory.

  • Supports up to 64 GB (unbuffered) with 16 GB DIMMs on 64-bit computers

Oasis motherboard specifications

Memory upgrade information

  • Dual channel (2 DIMMs per channel) memory architecture

  • Four DDR4 UDIMM (288-pin) sockets

  • Supports PC4-25600 (DDR4-3200)

  • Supports 8 GB and 16 GB DDR4 UDIMMs

  • Supports up to 4 GB on 32-bit systems

    Note:

    32-bit systems cannot address a full 4.0 GB of memory.

  • Supports up to 64 GB (unbuffered) with 16 GB DIMMs on 64-bit computers

OasisOC motherboard specifications

 

Memory upgrade information

  • Dual channel (2 DIMMs per channel) memory architecture

  • Four DDR4 UDIMM (288-pin) sockets

  • Supports PC4-25600 (DDR4-3200)

  • Supports 8 GB and 16 GB DDR4 UDIMMs

  • Supports up to 4 GB on 32-bit systems

    Note:

    32-bit systems cannot address a full 4.0 GB of memory.

  • Supports up to 64 GB (unbuffered) with 16 GB DIMMs on 64-bit computers

[edit] so for me it s like that :

 

memooire vitesse.gif

 

Capture d’écran 2022-02-12 171030.png

--------------------------------------------- Signature ---------------------------------------------
was this reply helpful , or just say thank you ? Click on the yes button

Please remember to mark the answers this can help other users
please click on the accept as solution button if message provided an answer to the problem




Desktop-Knowledge-Base
Windows 11 22h2 inside , user

------------------------------------------------------------------------------------------------------------
1 person found this reply helpful
Was this reply helpful? Yes No

‎02-12-2022 12:41 PM

HP Recommended

The PC is the GT13-1284 with the Hana motherboard. The specs don't fess up to the dirty little secret that the motherboard won't take advantage of CL < 22. Bad form HP!

Was this reply helpful? Yes No

‎03-08-2022 02:58 AM

HP Recommended

What I did was run cpu-z to see what my recommended timings on the memory would be and copied it over to AMD Ryzen Master.  I am running non-stock memory also, G.Skill 32gb 3600 Tridentz RGB kit 16x2, and it works great.  I believe there is another bios update past the F.12 but I didn't bother since AMD Master program is working for me.  You can set the memory timings in the BIOS for the F.12 version reboot and smash the F10 key and go to Advanced under there you apply an XMP profile (which was broken timings for me) or choose custom, I did custom and it would save but on windows task manager it would show the 2667 speed as it wasn't applying the BIOS settings.   

 

So to get mine to work I included the memory in AMD Ryzen Master and set the following as picture describes, use half speed since its dual channel (IE: 3600mhz = 1800), hit apply, rebooted good to go. Apps needed CPUz for Info display, Newest AMD Ryzen Master.  Here is my screen shots and task manager view of set speed.  There are a few You Tube videos also walking you through the Omen 30l or omen 25.

 

AMD 5600X - 3080 - G.Skill 32gb 3600 RAM - XPG Adata S70 Blade 2TB M.2 - b550 Hana mobo - Case Cosair 220T (swapped)

Include the memory control and couple and change only the values I change. I left everything else auto.Include the memory control and couple and change only the values I change. I left everything else auto.HP 8876 Hana motherboard specHP 8876 Hana motherboard specI used slots 2 and 4 farther away from CPU. What XMP profiles are on your memory sticks, I used last XMP 3602 column (yours will be different)I used slots 2 and 4 farther away from CPU. What XMP profiles are on your memory sticks, I used last XMP 3602 column (yours will be different)What your RAM is actually set to after running AMD MasterWhat your RAM is actually set to after running AMD MasterWindows task manager performance tab verification after AMD Master SetWindows task manager performance tab verification after AMD Master Set

1 person found this reply helpful
Was this reply helpful? Yes No
Warning
Be alert for scammers posting fake support phone numbers and/or email addresses on the community.
If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.
Didn't find what you were looking for? Ask the community
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.