Upgrading HP Desktop M01-F0xxx

[Joshg123]

I am looking to upgrade my psu and wanted to see if the L05757-800 500W psu will fit in my case.

My pc model is the HP M01-F0xxx

 

[old_geekster]

@Joshg123 , welcome to the Community.

What is the full model of your computer?  I will help you further when I have this information.

[Joshg123]

Hey thanks for the quick reply and welcome. 

my full model I believe is the M01-F0024. I saw a few similar posts to this with your response to them telling them to get a L05757-800. I ordered one off eBay and hope it fits in the case and works with my motherboard. 
I’m new to upgrading my pc so this has been a huge learning experience the past few weeks.

[Joshg123]

Update: Opened it and installed the new psu. Has a weird smell to it but went away once installed and the computer is running. Also installed a gpu with it. Hoping everything works out. 

[Joshg123]

Also I am trying to download GeForce experience and my download is taking an insane amount of time. I use a lan cable.

[old_geekster]

Thank you for the additional information, @Joshg123!

I am glad that the PSU works for you.

You may have to restart the download.  Sometimes a glitch can occur that causes downloads to be extremely slow.

[Joshg123]

soo the internet was being weird due to a storm in the area. Anyways, everything is working fine pretty happy with the results. Thank you for recommending that psu to someone else on another ticket.

Any chance you can help me figure out what kind of ssd I would need for this motherboard? It has a pci-e slot I believe but still very new to this and not sure about all the details of a ssd (etc..)

[old_geekster]

You are very welcome, @Joshg123!  I understand your lack of knowledge of SSD's.  It took me a lot of reading guides to figure them out.

Here is the spec on the SSD slot on your motherboard: One M.2 socket 3, key for SSD (PCIe x4).  Here is an example of a SSD that should be compatible with your motherboard.

[Joshg123]

Thank you so much! Yea this was the type I was thinking but I wanted to be sure. 

[old_geekster]

Again, you are very welcome, @Joshg123!