Will 880-050 / Tampa motherboard SLI

[PaladianX]

Wondering if the Tampa motherboard in my 880-050 will allow 2 GTX0180TI in SLI.

[banhien]

@PaladianX 

From its specs

           https://support.hp.com/au-en/document/c05506518

It has following Expansion Slots:

• Two PCI Express x16 physical slots (Gen 3.0), each slot with x8 bus lanes
• One M.2 socket 1, key A
• One M.2 socket 3, key M

Please use the following discussion

        https://h30434.www3.hp.com/t5/Gaming-Desktops/OMEN-880-130-SLI-Upgrade/td-p/7503563

Regards.

[Prométhée · Accepted solution]

Hello

in the example given it is a question of the tampa2 here, it is the tampa
A similar model is indicated, but the original graphics card may not be suitable either, see if there is the sli connector on it?

it may be very complicated, because you will need the same HP model I imagine

OMEN by HP 880-020t Desktop PC CTO Product Specifications and Configurable Options 

For more information on the Tampa motherboard, see Tampa motherboard specifications.

Must select one of the following options:

• NVIDIA GeForce GTX 1060 (3 GB) (GDDR5)
• NVIDIA GeForce GTX 1070 (8 GB) (GDDR5)
• Dual NVIDIA GeForce GTX 1070 SLI (8 GB) (GDDR5)
• NVIDIA GeForce GTX 1080 (8 GB) (GDDR5X)
• Dual NVIDIA GeForce GTX 1080 SLI (8 GB) (GDDR5X)
• NVIDIA GeForce GTX 1080Ti (11 GB) (GDDR5X)
• AMD Radeon RX 580 (4 GB) (GDDR5)
• Dual AMD Radeon RX 580 Crossfire (4 GB) (GDDR5)

Must select one of the following options:

• 500 W
• 750 W

you have

NVIDIA GeForce GTX 1080Ti

• Form Factor: Full-height PCB with ATX dual slot bracket
• Dimensions: 12 Layer / (4.4 in x 10.5 in)
• Rear I/O connectors: HDMI + 3 DisplayPort
• Maximum resolution:
  • DisplayPort resolution: 7680 x 4320 at 60Hz YUV 420 8 bit (DP 1.3/1.4 ready)
  • HDMI resolution: 4096 x 2160 x 24bpp @ 60 Hz (HDMI 2.0)

    note:

    Not all ports support the highest resolutions.

• Memory size: 11 GB (352-bit)
• Memory type: GDDR5X
• Total power consumption: 250 W max
• Supports up to four displays at the same time with independent resolutions up to the maximum.
• Graphic controller / Clock: GP102 - 350 - K1 - A1 / 1480 MHz (Base) 1582 MHz (Boost)
• Cooling: Active fan-sink with 4 pin fan control
• External power cables: One PCIe 2x4 (8pin) & One PCIe 2x3 (6pin)
• DirectX: DX 12
• PCIe x16 Gen3

Internal 500 W

• 500 W internal power supply
• Active PFC Bronze efficiency

so  if it can help in parts for this product, we find this reference

929629-001

NVIDIA SLI Bridge Pascal

[PaladianX]

Yes there is an SLI Connector on my GTX1080TI and I have already upgraded to a 1000W Platinum PSU.

I'll give it a shot.