Admin bios password

[calliec2]

I did a clean install of windows 11 after formatting and partitioning the hard drive.  after the installation i updated the bios version and firmware to .25.  the install and roll up went perfect but when i tried to enter bios it now has an admin password with no code generated after three failed attempts.

[WAWood]

If you're planning to reinstall, or have already reinstalled, Windows from media you made from a Microsoft download. this is a BIG MISTAKE. Why?

Because Windows from MS will only install the generic drivers that MS supplies, not the HP custom drivers your laptop needs. Even if the Win11 install comes off OK, the laptop will not be OK because some of the hardware components will not work properly due to the lack of HP drivers.

In addition, the Windows product key embedded into the firmware of the motherboard can only be used to activate an HP OEM version of Windows. If you install anything else, it will not activate using that key and you will have to buy your own retail key.

The best course of action is to install, or reinstall, using a HP OEM version of Windows.

If your PC is a 2016 model or newer, you should see if you can make a bootable USB recovery drive using the HP cloud recovery tool on a working PC.

The recovery drive can then be used to install Windows and the HP drivers and utilities that originally came with your PC.

You will need a working PC and a 32GB USB stick to hold the recovery files. Here is the link:

https://www.youtube.com/watch?v=xmtXOU40vxk

You use the Microsoft Store to download the actual tool:

https://apps.microsoft.com/detail/9mtks9pr7r3n?rtc=1&hl=en-us&gl=us

If you use a different PC to run the tool, you will have to provide your PC's product number. Here is an HP link for finding that information:

https://support.hp.com/us-en/document/ish_2039298-1862169-16

Here's a video from HP Support about using the Cloud Recovery Tool:

https://www.youtube.com/watch?v=P7AwuKNJKS4