HP Victus 16 fans full load

[TommyBoy222]

Hello,

the same problem like all people with the Victus 16 in the world:

https://h30434.www3.hp.com/t5/Gaming-Notebooks/HP-Victus-fans-doesnt-listen-to-manually-set-speed/td...

https://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/Victus-16-Omen-Gaming-Hub-Fans...

https://www.reddit.com/r/HPVictus/comments/1ami0hg/fans_stuck_5000_rpm_in_game/

After close games and wait 1 HOUR at Windows desktop not help... Try manually set in Omen but not respond to any settings.

HP doesn´t make with this anything and nothing help in that links... Any suggestions? I have biggest coolermaster fan under it (Notepal X3). Notebook have 3 days, so no dust.

[Irfan_06]

Hi @TommyBoy222,

Welcome to the HP Support Community.

Thank you for posting your query. I will be glad to help you.

I see that you are facing an overheating or fan  issue with your Laptop.

A) Perform a power drain on your PC.

1) Unplug the power cord from the PC & wall.

2) Disconnect the power cable from the AC adapter if it is a detachable part and keep it aside.

3) Press and hold the power button down for 15 seconds and release the power button, wait for about 30 seconds.

4) Plug the power cord back into the AC adapter, then connect it to the wall and to the charging port on your PC.

5) Power on the PC and Update the BIOS for your PC by clicking on the link.

Make sure you keep only the charger plugged in while updating the BIOS for your PC.

Click on the + sign next to BIOS and then download the file.

Open the file and follow the on-screen instructions to complete the update.

B) Kindly refer to the steps on this link  to troubleshoot and let me know if that resolves the issue.

C) Check the 'OMEN Performance Control' setting by clicking on the link.

Please mark this post as “Accepted Solution” if the issue is resolved and if you feel this reply was helpful click “Yes”.

I hope this helps.

Take care and have a good day.

Irwin6

HP Support

[TommyBoy222]

Sorry, no one help. Wait 15 with switch on, 30 sec again after it. And firmware says "Its the actual, no new".

Its 38C, GPU is off and still 5000RPM, bzzzzzzzzzzzzzzzzzzzzzzzzzzm:

When computer is idle 14 hour, 14 hours at loud 5000rpm... CPU utilization is below 5%, only when click PrintScr then go up 7%.

[Irfan_06]

Hi @TommyBoy222,

I am sorry to hear that the above steps did not help much but i do appreciate your efforts in performing the troubleshooting steps.

The support on the HP community is currently available within certain constraints. We are striving to enhance our assistance and broaden its scope. We appreciate your understanding and patience.

I've sent you a private message with the instructions. In order to access your private messages, Click the Private message icon on the upper right corner of your HP Community profile Next to your profile Name, you should see a little blue envelope, please click on it or simply click on this link

Take care and have a great day ahead!

Irwin6

HP Support