New update contained a BIOS update. Now I'm in a boot loop.

[Upperstrange]

Victus by HP 16.1 inch Gaming Laptop PC 16-e0000 (2V8Z4AV) 

Got this new software update. It contained a BIOS update and now I am stuck in this boot loop. The screen just turns on for a second (no logo) and it turns off.

Please help.

[Anand_Andy]

Hi @Upperstrange,

Welcome to the HP Support Community

I understand you are facing a boot issue with your Victus By HP 16.1 Inch Gaming Laptop PC 16-E0000. Not to worry I will help you to get a resolution to resolve the issue.

Lets' try the below steps:

Crisis BIOS Recovery

1. Turn off the computer, and then connect the power cord.
2. Press and hold the Windows key and the B key at the same time, and then press and hold the Power button for 2 to 3 seconds.

1. Release the Power button but continue pressing the Windows and B keys. You might hear a series of beeps.

• If the HP BIOS Update screen does not display, repeat the previous steps but press the Windows key and the V key. If the screen still does not display, your computer might not support the feature or there is a hard drive issue. Continue to the next section to Recover the BIOS using a USB recovery drive.
• If the Power light turns off, the Power button was held too long. Repeat the previous steps, making sure to hold the Power button for only 2 to 3 seconds.
• If a BIOS recovery message repeatedly displays, continue to the next section to Recover the BIOS using a USB recovery drive.
• If a message that the computer improperly shut down or a boot problem is detected displays, follow the on-screen instructions to resolve the error.
• If Windows starts, update to the latest BIOS version. Go to HP Notebook PCs - Updating the BIOS for more information.
  The HP BIOS Update screen displays and the recovery begins automatically.

If the issue persists, then please follow the steps mentioned on this document: HP PCs - Computer does not boot or start

Hope this helps! Keep me posted. 

Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!