cancel
Showing results for 
Search instead for 
Did you mean: 
kelvin_kurnia
New member
4 2 0 0
Message 1 of 5
4,794
Flag Post

Solved!

Omen command center stop working when i click update

HP Recommended
Microsoft Windows 10 (64-bit)

so i just reset my laptop, and then downloaded omen command center. then i open the device "omen 15" it asked me to update the drive, but when i click update it just suddenly not responding. i cant click anything nor exit it. so i open my task manager and managed to close it but when i click the omen command center again it didn't do anything... so i reinstall it and the same thing happened again. 

is there other way for me to adjust my laptop's fan... i just need the omen command center for it

1 ACCEPTED SOLUTION

Accepted Solutions
Photoray002
Level 15
Level 15
12,665 12,443 1,306 4,290
Message 4 of 5
Flag Post
HP Recommended

I was asking also how you did the reset. Again I assume you used the Microsoft Media Creation Tool.... Correct?

If you did a clean reinstall that way, you wiped everything off and need to add it back again.

 

For the command center, you need...

Other drivers you might need for other stuff would be found on the HP Support assistant.

 

 

 

View solution in original post

4 REPLIES 4
Photoray002
Level 15
Level 15
12,665 12,443 1,306 4,290
Message 2 of 5
Flag Post
HP Recommended

@kelvin_kurnia 

 

You didn't mention what model you have?
If you reinstalled Windows vanilla ISO, you probably dont have the HP Support Assistant installed or the event utility.

Does your notebook have the Product Number on the bottom of the case? What is it?

 

0 Kudos
kelvin_kurnia
Author
New member
4 2 0 0
Message 3 of 5
Flag Post
HP Recommended

7NN18PA#AR6t this is my product number

however i cant find HP event utility download site. but i've downloaded and installed the hp support assistant. and again i reinstall the omen command center but nothing changed

0 Kudos
Photoray002
Level 15
Level 15
12,665 12,443 1,306 4,290
Message 4 of 5
Flag Post
HP Recommended

I was asking also how you did the reset. Again I assume you used the Microsoft Media Creation Tool.... Correct?

If you did a clean reinstall that way, you wiped everything off and need to add it back again.

 

For the command center, you need...

Other drivers you might need for other stuff would be found on the HP Support assistant.

 

 

 

View solution in original post

kelvin_kurnia
Author
New member
4 2 0 0
Message 5 of 5
Flag Post
HP Recommended

it work... thankyou very much 

0 Kudos
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation