Create an account on the HP Community to personalize your profile and ask a question
09-16-2022 12:08 PM - last edited on 09-21-2022 06:24 AM by JessikaV
My HP Omen GT13-1001ur with 886c motherboard can see my new 4 Tb SSD m.2 after its physical installation in the PC but stops recognizing it a few seconds later. The second 1Tb SSD with Windows is always seen. I've tried to swap drives, to retain only 4 Tb SSD and BIOS update but nothing helps, 4 Tb is not recognized even by BIOS.
Specs say the PC has Two M.2 socket 3, key M (one for SSD card PCIe x4 Gen 3) among expansion slots. New SSD Kingston FURY Renegade [SFYRD/4000G] has PCI-E 4.0 x4 with key M so they should be compatible.
How to recognize new 4 Tb SSD?
09-16-2022 02:44 PM
.. How to recognize new 4 Tb SSD?
My suggestion format 4TB as GPT and try again. The following Guide shows you how
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Didn't find what you were looking for? Ask the community