• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
The HP Community is where owners of HP products, like you, volunteer to help each other find solutions.
Locked

‎04-01-2021 06:38 AM - edited ‎04-01-2021 08:08 AM

HP Recommended
Product: Omen 15 ek0013nl
Operating System: Microsoft Windows 10 (64-bit)

Goodmorning everyone

On my Omen 15 2020 processor i7 10750 GPU 2060 I have a problem with the undervolting card of the omen gaming hub

When I perform the undervolt everything works correctly giving me an undervoltage of 0.075 mv thus solving the overheating problems I had noticed in the PC (purchased two weeks ago)

When the PC restarts The undervoltage settings return to zero and I see this also in the hw monitor as it does not keep the offset values ​​and I have to manually reset them at each restart in the Omen Gaming hub

I would like to know why it doesn't keep settings

The BIOS is at version f 07

Reapplying them by hand returns to give the offset values ​​but does not seem to undervolt on every reboot

Thanks

 

3 REPLIES 3

‎04-01-2021 07:31 AM

HP Recommended

Hey @Sgarmi 

Hope your doing fine! 

Thank you for visiting our English HP Support Community. We are only able to reply to posts written in English. To insure a quick response it would be advisable to post your question in English.





Thank you for your understanding.

Regards.

I work on behalf of HP.
HP Support Community Moderator
Was this reply helpful? Yes No

‎04-01-2021 08:01 AM

HP Recommended

Goodmorning everyone

 

 On my Omen 15 2020 processor i7 10750 GPU 2060 I have a problem with the undervolting card of the omen gaming hub

 

 When I perform the undervolt everything works correctly giving me an undervoltage of 0.075 mv this solving the overheating problems I had noticed in the PC (purchased two weeks ago)

 

 When the PC restarts The undervoltage settings return to zero and I see this also in the hw monitor as it does not keep the offset values ​​and I have to manually reset them at each restart in the Omen Gaming hub

 

 I would like to know why it doesn't keep settings

 

 The BIOS is at version f 07

 

 Reapplying them by hand returns to give the offset values ​​but does not seem to undervolt on every reboot

 

 Thanks

Tags (1)
Was this reply helpful? Yes No

‎04-01-2021 08:04 AM

HP Recommended

Goodmorning everyone

On my Omen 15 2020 processor i7 10750 GPU 2060 I have a problem with the undervolting card of the omen gaming hub

When I perform the undervolt everything works correctly giving me an undervoltage of 0.075 mv thus solving the overheating problems I had noticed in the PC (purchased two weeks ago)

When the PC restarts The undervoltage settings return to zero and I see this also in the hw monitor as it does not keep the offset values ​​and I have to manually reset them at each restart in the Omen Gaming hub

I would like to know why it doesn't keep settings

The BIOS is at version f 07

Reapplying them by hand returns to give the offset values ​​but does not seem to undervolt on every reboot

Thanks

Was this reply helpful? Yes No
Warning
Be alert for scammers posting fake support phone numbers and/or email addresses on the community.
If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.
Didn't find what you were looking for? Ask the community
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.