Guidelines
The HP Community is where owners of HP products, like you, volunteer to help each other find solutions.
HP Recommended
HP Omen 16 (6800H 3070ti)

I haven't opened my laptop yet. I was wondering if I can use thermal paste (Artic MX4) instead of thermal putty/pad to cover vram?

1 ACCEPTED SOLUTION

Accepted Solutions
HP Recommended

Hi @aDIE911,

 

Welcome to HP Support Community.

 

Thank you for posting your query, I will be glad to help you.

 

Yes, you can use thermal paste like Arctic MX4 for VRAM in your HP Omen 16 laptop, though it's important to be cautious. Thermal paste is generally more effective than thermal pads or putty for transferring heat between the VRAM chips and the heatsink. However, there are a few things to keep in mind.

 

  • Thickness: Thermal paste is typically thinner than thermal pads or putty, so you'll need to apply it carefully to ensure it covers the VRAM adequately. Too little paste might not make good contact, while too much can create a mess.
  • Conductivity: Make sure the thermal paste you use is designed for electronic components and is non-conductive to avoid short-circuiting any components. Arctic MX4 is a good choice in this regard as it is electrically non-conductive.
  • Application: When applying thermal paste, use a small amount and spread it evenly. You can use a plastic spreader or simply apply a small dot and let the pressure from reassembling the laptop spread it.
  • Cleanup: If you decide to switch from thermal pads to paste, make sure to clean off any old thermal material thoroughly before applying the new paste. Use isopropyl alcohol and a lint-free cloth for cleaning.

 

Always follow the HP recommendations and instructions to avoid any damage.

 

I hope this helps.

 

Take care and have a good day.

 

Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!

 

Alden4

HP Support 

Raj_05
HP Support Community Moderator

View solution in original post

1 REPLY 1
HP Recommended

Hi @aDIE911,

 

Welcome to HP Support Community.

 

Thank you for posting your query, I will be glad to help you.

 

Yes, you can use thermal paste like Arctic MX4 for VRAM in your HP Omen 16 laptop, though it's important to be cautious. Thermal paste is generally more effective than thermal pads or putty for transferring heat between the VRAM chips and the heatsink. However, there are a few things to keep in mind.

 

  • Thickness: Thermal paste is typically thinner than thermal pads or putty, so you'll need to apply it carefully to ensure it covers the VRAM adequately. Too little paste might not make good contact, while too much can create a mess.
  • Conductivity: Make sure the thermal paste you use is designed for electronic components and is non-conductive to avoid short-circuiting any components. Arctic MX4 is a good choice in this regard as it is electrically non-conductive.
  • Application: When applying thermal paste, use a small amount and spread it evenly. You can use a plastic spreader or simply apply a small dot and let the pressure from reassembling the laptop spread it.
  • Cleanup: If you decide to switch from thermal pads to paste, make sure to clean off any old thermal material thoroughly before applying the new paste. Use isopropyl alcohol and a lint-free cloth for cleaning.

 

Always follow the HP recommendations and instructions to avoid any damage.

 

I hope this helps.

 

Take care and have a good day.

 

Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!

 

Alden4

HP Support 

Raj_05
HP Support Community Moderator
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.