Victus crashing with white screen and buzzing noice or having driver error message when gaming.

[Sukhtugs]

I bought this Victus laptop around a month ago and it was fine till a week ago my screen became white and started making buzzing noice for no reason. I didnt know what happened so i left it. Untill i played a different game it made a buzzing noice and crashed. Now it is showing me error message about my driver. I put my settings on the lowest and have it on eco mode.I tried few stuff but it didnt work. I dont know what to do. I need a real help.

[Irfan_06]

Hi @Sukhtugs,

Welcome to HP Support Community.

Thank you for posting your query, I will be glad to assist you.

I understand you're experiencing an issue with your Laptop that is malfunctioning.

I apologize for any inconvenience this may have caused, I'm here to help you today.

Please follow the below steps to fix the issue.

-Perform a power drain on your PC.

1) Unplug the power cord from the PC & wall.

2) Disconnect the power cable from the AC adapter if it is a detachable part and keep it aside.

3) Press and hold the power button down for 15 seconds and release the power button, wait for about 30 seconds.

4) Plug the power cord back into the AC adapter, then connect it to the wall and to the charging port on your PC.

5) Power on the PC and check if it boots into Windows now.

-Update the BIOS for your PC by clicking on the link.

Make sure you keep only the charger plugged in while updating the BIOS for your PC.

Click on the + sign next to BIOS and then download the file.

Open the file and follow the on-screen instructions to complete the update.

-Install all the pending updates for the Windows operating system following the below steps.

Go to Start > Settings > Update & Security > Windows Update and select Check for updates. If the upgrade is available for your device and you want to proceed, download and install it.

- If the issue still persists,  Please follow the steps below to perform an extensive system test to confirm if the hardware is working fine.

1) Shut down the computer.

2) Turn the computer back on again and repeatedly tap on the ESC until a Startup menu appears.  

3) Press F2 once.  

4) Go to the system test > extensive test

If the hardware is working fine. Please click on this link to perform a recovery on your Laptop.  (Take a backup of the data before performing a recovery)

Please mark this post as “Accepted Solution” if the issue is resolved and if you feel this reply was helpful click “Yes”.

I hope this helps.

Take care and have a great day ahead!

 Irwin6

HP Support

[Sukhtugs]

Will try in few hours

[Irfan_06]

Please perform the above shared steps at your convenience and let me know if that resolves the issue.

I will be archiving this case for now. However, you can respond to the same thread to continue the conversation. 

Please mark this post as “Accepted Solution” if the issue is resolved and if you feel this reply was helpful click “Yes”.

Take care and have a great day ahead!

Irwin6

HP Support