rebind OMEN key to reuse it to close the screen

[monolitho]

How can I reuse my OMEN key and use it as a screen switch that can turn on or turn off the screen with just one click?

[Sneha_01]

Hi @monolitho,

Welcome to HP Support Community.

Thank you for posting your query, I will be glad to help you.

To repurpose the OMEN key on an HP OMEN laptop or keyboard and use it as a screen switch to turn the screen on or off with a single click, you'll need to follow a multi-step process. This involves remapping the OMEN key to a different function that can then be used to control the screen's power state. Here's a general guide on how to achieve this:

Step 1: Identify the OMEN Key Code

First, you need to identify the scan code or key code that your system recognizes when you press the OMEN key. This can usually be done using key mapping software or by checking the system's event viewer for keyboard events. However, it's worth noting that the OMEN key might not send a standard key code that's easily remappable without specific software provided by HP or third-party key mapping tools.

Step 2: Install Key Mapping Software

If the OMEN key can be remapped, you will need to use key mapping software. For Windows, software like SharpKeys, KeyTweak, or AutoHotkey can be used. AutoHotkey, in particular, is very versatile and allows for scripting complex behaviors for keys.

• SharpKeys or KeyTweak: These tools provide a GUI for remapping keys. You can use them if the OMEN key is recognized and can be remapped to a different function directly.
• AutoHotkey: This is a more powerful tool that can run scripts to perform specific actions when a key is pressed.

Step 3: Write a Script to Toggle the Screen (AutoHotkey Example)

If you're using AutoHotkey, you'll need to write a script that toggles the screen on or off. Here's a simple script example that does this by simulating the press of the Win+P keys twice, which cycles through the display modes and can effectively turn off the screen if it's set to "PC screen only" initially:

autohotkeyCopy code

OMENKey::  ; Replace OMENKey with the actual key or combination if needed Send, {LWin down}{P down}{P up}{LWin up} Sleep, 100  ; Wait a bit for the menu to appear Send, {P down}{P up} return

Note: This script assumes that pressing Win+P twice will result in turning off the screen, which might not always be the case depending on your display settings. You might need a more sophisticated script that directly turns the screen off.

Step 4: Set the Script to Run at Startup

If you're using AutoHotkey, you can compile the script into an executable and place it in your startup folder so it runs automatically when you log into Windows.

Additional Considerations

• Direct Screen Control: For more direct control over the screen (e.g., using the Windows API to turn the screen off), you might need a more complex script or application. This could involve programming beyond simple key remapping.
• OMEN Command Center: Check if the OMEN Command Center (or HP System Event Utility) offers any native support for customizing the OMEN key. Some versions of the software might allow you to remap the key without needing third-party software.

I hope this helps.

Take care and have a good day.

Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!

Rachel571 

HP Support

[Sneha_01]

.