HP Deskjet 2600

[mya30]

I'm trying to set up my DeskJet 2600 all-in-one and on the screen E8 is showing up... what do I do? its brand new out the box and everything.

[Jay_G24]

Hi @mya30

Welcome to the HP Support Community. 

That is the regular control panel on the printer 

Here is the control buttons indicate-

 

You will find this on the printer user guide as well -User Manual

You may refer to this document to setup your printer  First Time Printer Setup

Let's try a power reset on the printer

Reset the product

• With the printer turned on, disconnect the power cord from the rear of the printer.
• Unplug the power cord from the wall outlet.
• Wait at least 60 seconds.
• Plug the power cord back into the wall outlet.
• Reconnect the power cord to the printer.
• Turn the printer on. HP recommends plugging the printer directly into a wall outlet.

Try and make a copy.

Hope this helps! Keep me posted. 

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.

Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping