cancel
Showing results for 
Search instead for 
Did you mean: 
Kamesh_96
New member
1 0 0 0
Message 1 of 2
97
Flag Post
HP Recommended

Ink tank 315 installation

Hp ink tank 315
Microsoft Windows 10 (64-bit)

Is that okay if install the printheads before filling the ink tanks...?

1 REPLY 1
HP Support Agent
HP Support Agent
9,205 9,208 808 977
Message 2 of 2
53
Flag Post
HP Recommended

Ink tank 315 installation

Hi @Kamesh_96

 

Welcome to the HP Support Community. 

 

HP recommends filling the inks tanks before installing the printheads. 

 

Refer to this document for more information - HP Ink Tank 310 Printer - First Time Printer Setup

 

Use the following tips to work with printheads:


● To protect the printheads from drying out, always turn the printer off using the Power button, and wait until the Power button light goes out.
● Do not open or untape printheads until you are ready to install them. Leaving tape on the printheads reduces ink evaporation.
● Insert the new printheads into the correct slots. Match the color and icon of each printhead to the color and icon for each slot. Make sure the printheads snap into place, and then close the printhead latch. After new printheads are installed and primed with ink, do not open the printhead latch unless installing new printheads or moving the printer outside your home or office.
● Align the printer for best print quality.

 

Hope this helps! Keep me posted. 

 

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.

Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

 

Have a great day! 

Asmita
I am an HP Employee

0 Kudos
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation