-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Apps, Services & Software
- HP Instant Ink
- my black ink is smudged is it a faulty cartridge

Create an account on the HP Community to personalize your profile and ask a question
08-24-2022 03:50 AM
@kd138
Welcome to the HP support community.
I understand that the black ink is smudged, I am glad to assist you.
Manually clean the area around the ink nozzles
Gather the following materials:
A clean, lint-free cloth or a clean, dry cotton swab
Distilled or bottled water
CAUTION:Do not use tap water because it might contain contaminants that can damage the printhead.
Open the ink cartridge access door.
The carriage moves to the center of the printer.
Figure : Opening the ink cartridge access door
Wait until the printer is idle and silent before you continue.
Lightly press down on one of the ink cartridges to release it, and then pull the ink cartridge toward you out of its slot.
Figure : Removing the ink cartridge
CAUTION:Do not remove both ink cartridges at the same time. Remove and then clean each ink cartridge one at a time. Do not leave an ink cartridge outside the printer for more than 30 minutes.
Hold the ink cartridge by its sides.
Figure : Holding the ink cartridge by its sides
Lightly dampen a clean, lint-free cloth or swab with bottled or distilled water.
Clean the face and edges around the ink nozzle with the cloth or swab.
CAUTION:Do not clean the ink nozzle plate.
Nozzle plate - Do not clean
Area surrounding ink nozzle - Do clean
Ink cartridge contacts - Do not clean
Wait 10 minutes for the cleaned area to dry before you continue.
Hold the ink cartridge by its sides with the contacts toward the printer, insert the ink cartridge into its slot, and then gently push the ink cartridge until it snaps into place.
Figure : Snapping the ink cartridge into place
Repeat these steps to clean around the nozzles on the other ink cartridge.
Close the ink cartridge access door.
Refer to this HP document for further assistance:- Click here
Keep me posted.
If this helps, please mark the public post as an accepted solution so that it benefits several others.
Cheers.
Sandytechy20
I am an HP Employee