the Instant Ink Program I just want to print without the insta ink account

[RicardoH411]

the Instant Ink Program - I just want to print without the insta Ink program 

[Irfan_06]

Hi @RicardoH411,

Welcome to HP Support Community.

Thank you for posting your query, I will be glad to help you.

I see that you are looking for help with printing without the instant ink service.

Please follow the steps below to fix the issue.

A) Perform a power drain.

1) Take out the cartridges

2) Unplug the power cord from the printer & wall.

3) Press and hold the power button down for 15 seconds and release the power button, wait for about 30 seconds.

4) Plug the power cord back into the printer and wall, ensure the printer is plugged into the wall & not into a surge protector.

5) Insert the cartridges back into the printer.

Remove the cartridges > Unplug the power cord > Wait for 30 seconds > Plug the power cord back in > Insert the cartridges

B) Kindly refer to the steps on this link to update the printer firmware and let me know if that resolves the issue.

C) If the issue still persists, uninstall the printer software by following the steps from this link and restart the devices.

D)  Install the printer software by clicking on the link again and let me know if that resolves the issue.

Note: Enable Bluetooth for an HP Smart app setup: Enable Bluetooth on your computer or mobile device so that HP Smart can detect the printer during the setup.

E) If you cancel the instant ink Service, even if the Subscription Cartridges provided with your subscription are not empty, they will stop working in your printer and you will have to replace all of them with standard cartridges.

If you are not able to print even after replacing HP genuine ink cartridges, please stop Web Services on the printer.

HP Instant Ink > How to > Instant Ink > Manage Account > Turning Off Web Services

Optional - be sure Web Services is "off":

After you switch off Web Services, wait a minute and then switch off the printer.

Wait until the printer is completely shut down > wait a minute or two.

Switch on the printer.

Please mark this post as “Accepted Solution” if the issue is resolved and if you feel this reply was helpful click “Yes”.

I hope this helps.

Take care and have a good day.

Irwin6

HP Support