Autodesk Flame - Reference is 44.1k - Need 48k

[Comp281]

Hi Lizzy_G,

Thanks for your help with this. Could you send me the patch as well?

Thank you,

Andrew

[engatkevinvfx]

Hi Lizzy_G,

Thanks for your helping the Flame community with this. Could you send me the 48kHz  patch as well?

We're running ZCentral Version: 20.0.0.23427 / Centos7.6 / Flame2020.3 and Flame2021.1 if that is useful  info?

Thank you,

Graeme

[Lizzy_G]

Hi Graeme,

This issue was fixed in the last patch release of Remote Boost.

Please visit https://hp.com/zcentralremoteboost to download RB 20.0.1.

[rberk]

Hi Lizzy G, 

We also use Flame on HP z840s

Can you send me a link to the rgs 48khz patch 

[lptech]

Hello,

Please send me the fix for the audio issue (48kHz). Running Flame2020_3 on Centos7, Remote Boost 20.0.1.

Thanks.

[Lizzy_G]

⚠️ PLEASE READ ⚠️

If you are using Remote Boost 20, please update to the latest patch release (20.0.1).

https://hp.com/zcentralremoteboost

Posted about it here too: 

https://h30434.www3.hp.com/t5/HP-ZCentral-Remote-Boost-and-Connect/Patch-Released-Remote-Boost-2020-...

This patch updates the alsa configuration script to allow audio to be captured at 48k.

After updating to RB 20.0.1, just go to /opt/hpremote/rgsender/audio where you will find the script and a README file describing all possible config options.

Only RGS 7.7 users still need a workaround for this issue. If that's your case, then please let me know.

Thanks, everyone!

[keimiya]

Hello,

Please send me the patch. We are running Flame 2019 and RGS 7.7 on CentOS 7.2.
Remote Boost 2020 could not install CentOS 7.2.

Thanks.