cancel
Showing results for 
Search instead for 
Did you mean: 
Orange77
New member
2 1 0 0
Message 1 of 4
729
Flag Post

Black screen on Linux RGS

HP Recommended
RGS
Linux

I have centos setup for headless setup.  When I log into rgs I am presented with a Black screen.  I know their was a thread about windows do you know the fix for linux?

 

Tags (2)
3 REPLIES 3
Orange77
Author
New member
2 1 0 0
Message 2 of 4
Flag Post
HP Recommended
Was this reply helpful? Yes No
KellyRGS
Level 7
Level 7
668 659 51 66
Message 3 of 4
Flag Post
HP Recommended

For headless sender, you will need to create an xorg.conf file.  You can use the nvidia-xconfig command to do this.  Look at the xorg.0.log file to find out what ports are connected.  I find it easier to then attach an EDID file to the port that I have from a display that meets all of the resolutions that I need in the xorg.conf file.

 

Example below:

nvidia-xconfig -c /dev/null -o xorg.conf --custom-edid=DFP:/etc/X11/edid/ZR2440w.txt --connected-monitor=”DFP-0, DFP-2”

 

The EDID file needs to be placed in the same directory as the xorg.conf file /etc/X11.

I work on the behalf of HP.

I am an HP employee.
Was this reply helpful? Yes No
KEYSLOG
Level 1
4 6 0 0
Message 4 of 4
Flag Post
HP Recommended

Have you tried updating your graphic driver?  We have two properties that may help with this issue as well. 

1) Enable enhanced RGS resolution matching for Windows systems with Nvidia graphics

2) Rgsender.Compatibility.Displays.AllowNvidiaResolutionMatching=auto

keyslog
Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation