unable to connect wifi, router HP Inkjet 2676 advantage 2676

[brij11]

1. while connecting printer through wifi password does not accept of router and 12345678

2. wireless blue light blinking continously, to solve hold resume+wifi button for 3 sec but it not stabled.

3. on anroid mobile have installed hpsmart and hp plugin but not resolved the problem, I have two printer model no "HP DEKJET 2676 ALL IN ONE" not resolved the problem

[Kumar0307]

@brij11

Welcome to the HP Support Community!

1. The Wi-fi password to your router is not 12345678, This is the password for Wi-fi Direct.
2. The Blue Wireless light blinks if it is not connected to any network, it becomes steady once connected.
3. Make sure the printer and the mobile are connected to the same wireless network. This printer supports only a 2.4GHz network.

Connecting the printer to a wireless network and then to the mobile device may resolve this issue. Let us follow these steps: 

Step 1: Connect the printer to a wireless network

Use WPS to connect the printer to your wireless network.

1. Locate the WPS button on your router, but do not press it yet.

   If your router does not support WPS, skip to the next step to connect the printer with the HP Smart app.

2. Turn on the printer. If the printer is in sleep mode, press the Cancel button on the control panel.

3. On the printer control panel, press and hold the Wireless button  for at least 3 seconds or until the wireless light starts to flash.

4. On the router, press and hold the WPS button for 3 to 5 seconds or until it shows that the WPS connection process has started.

NOTE: The printer stops searching for a WPS connection two minutes after the wireless button is pressed. If you were unable to press the WPS button within that timeframe, attempt these steps again.

Once the printer connects to the wireless network, the blue Wireless light on the control panel turns on solid.

Step 2: Connect the printer with the HP Smart app

1. Make sure your Android device is connected to the same wireless network that you want to connect your printer to.

2. Go to 123.hp.com from a browser on your phone or tablet and install the HP Smart app.

3. Turn on the printer. If the printer is in sleep mode, press the Cancel button on the control panel.

4. Press and hold the Wireless and Cancel buttons until the Wireless light and Power light start to flash. You must complete network setup within 2 hours.

5. Open the HP Smart app, and then tap the Plus sign.

6. Tap Add Printer.

   A list of available printers displays.

7. Tap your printer. The printer name contains 'Setup' and the model number, such as HP-Setup>A8-Deskjet 3700 series.

8. Follow the on-screen instructions to type the WEP or WPA key (network password).

   If you do not know your network password, go to Find Your Wireless WEP, WPA, WPA2 Password.

9. After the printer connects to your wireless network, you can skip the remaining screens to complete the setup.

   Once the printer connects to the wireless network, the blue Wireless light on the control panel turns on solid.

10. Try to print.

Let me know how this goes.

If you feel my post solved your issue, please click “Accept as Solution”, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!