cancel
Showing results for 
Search instead for 
Did you mean: 
Daniolayinka
New member
1 0 0 0
Message 1 of 3
109
Flag Post
HP Recommended

49 service error: How to fix the problem on hp laserjetpro m410dn

hp laserjetpro m410dn
Microsoft Windows 10 (64-bit)

The Hp laserjet pro printer restarts when It is about to print a document. Just before it restarts it will show 49 service error

2 REPLIES 2
Level 11
Level 11
3,563 3,549 353 740
Message 2 of 3
89
Flag Post
HP Recommended

49 service error: How to fix the problem on hp laserjetpro m410dn

Most 49 errors are caused by out dated firmware. ORint a config page and compare the version you have installed with the one listed at support.HP.com and update as required.

If you find the information provided useful or solves your problems, help other users find the solution easier by giving kudos and marking my post as an accepted solution.
Reply
0 Kudos
AlS77
Level 5
268 258 17 29
Message 3 of 3
43
Flag Post
HP Recommended

49 service error: How to fix the problem on hp laserjetpro m410dn

49 & 79 errors are often caused by a print job that the printer can't process due to a font or other command inside the job. Usually PDF's or webpage prints are at fault, but could be anything. If you are the only one printing to the printer, go into the printer's print queue on your computer, delete all the pending print jobs, then shut down the printer and restart it. It should power up OK now. If there are others printing to the printer, you'll have to track down all of the pending print jobs on all computers and cancel them all. One of them will show a print job that is in error to print. Avoid printing that job to your printer, but if you really need it, try a different printer. Sometimes updating the printer's firmware to the latest version can help, but is not a guarantee.

Good luck.

Reply
0 Kudos
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation