59.f0 error

[cbritt]

I am currently working on a laserjet pro m452dn printer.  I was told that after printing 4 or 5 pages, an error occurs, 59.f0.  I did turn the printer off and on.   I am looking for a easy answer because taking this printer apart just to get to the fuser is not an easy job.

so if someone can assist me with this problem, I would be very happy

Cheryl Britt

Milwaukee Police Department

[fatbunny · Accepted solution]

Hi! Here's the solution https://www.youtube.com/watch?v=r8U9H7C3JqM&t=134s

[AlS77]

This 59.F0 error is typically the result of a small sensor switch inside the ITB (Intermediate Transfer Belt) assembly that is not working correctly. It will have variable amounts of resistance as it is activated during the course of operation and causes the error. It's supposed to detect and report to the controller when the plates are moved into position to press the belt into contact for the toner cartridge drums for color printing. HP came out with a new version of firmware for the DC Controller board to ignore this shortly after I brought it to HP's attention awhile ago since we were having so many issues with customer printers. The previous fix was to replace the ITB assy., which worked most of the time, but the firmware update should be tried first as it is quick and simple and we've had great success with it so far.

Here's the HP FTP site for it:
ftp://dccfw:.Gbu1108@ftp.usa.hp.com/

Better than taking apart the belt and switch.