Automatic duplexing, HP P1606

[Claire14]

Since upgrading to Windows 10, I have to manually re-set the automatic duplexing to 'Installed' in order to print on both sides.  How can I have this setting remain in place?

[Sayed_S]

Under Device & Printers, right click on printer and select Printer Properties. It will open a Window and under Genera Tab, check if Double Side is set to Yes. 
If yes, then it should be printing fine, click on preferences tab >> Finishing Tab >> Check the option "Print on both sides", apply and Ok Ok.

Although I am an HP employee, I am speaking for myself and not for HP.
--Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

[Claire14]

Thanks for your response.  Yes, my printer's General Tab is set to double sided printer.  I have tried everything, but am unable to find the Finishing Tab under Preferences.  All that comes up is Layout and Paper Quality.

[Sayed_S · Accepted solution]

Un-install the current driver which you have, restart the PC, then install the driver freshly. It should work for you.

Also, if you are using DISC for driver installation, then use online link from HP Site for driver.

Although I am an HP employee, I am speaking for myself and not for HP.
--Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"