Change language to English on display panel

[rie5]

Language changed from English to something else via display panel.  How do I change it back to English.  Thanks.

[Reskape]

Hello there

Possibly that one will be a hard one specially if you do not recognize the language but you can do that for sure

Try this first 

well you have a printer that has only bottoms and a little screen 

turn off the printer and then back on and follow this sequence

Press ok once then 4 times the right arrow then two times ok (at this point you should be on the language menu) keep going right until you see English and press ok to select it 

If this failed try these (it is a reset to the unit that will delete current settings and set up)

1. Turn the printer off.
2. Perform one of the following steps:
● LCD control panel models: Simultaneously press and hold the left arrow button and the Cancel
button. Keep these buttons depressed as you turn the printer on.
NOTE: It takes about 45 seconds before the NVRAM initialization process begins.
3. When the Permanent Storage Init. message appears on the display, release the buttons.
4. When the printer has finished the NVRAM initialization, it returns to the Ready state.

You will be guided directly to the Language menu after this reset 

[LunchBox69]

Thank you so much worked for me!!!!!!!!:robottongue:

[CompassBox]

Thanks For Being So Helpful

[John92101]

This isn't working for me. I accidently changed the language to German and I want to re-set to English. My control panel does not have a left arrow key. Do you mean the one on the keyboard? The cancel button, is this the X on the control panel?

[kevin-t]

Hello,

Thank you for posting in this thread. Unfortunately based on when the last response was made, I have closed this thread to help keep comments current and up to date. We recommend starting a new thread for your issue by clicking here.
To be more helpful with your post, you can add key information if you desire: 
1. Product Name and Number (please do not post Serial Number)
• Example: HP Pavilion DV2-1209AX or HP Deskjet 3000 Printer CH393A
2. Operating System installed (if applicable)
• Example: Windows XP, Windows Vista 32-bit, Windows 7 64-bit
3. Error message (if any)
• Example: ""Low disk space"" error in Windows
4. Any changes made to your system before the issue occurred
• Examples: Upgrading your Operating System or installing a new software; or installing new hardware like a printer, modem, or router.
If you have any other questions about posting in the community, please feel free to send me a private message!

Thank you