Duplex Printing / Two sidedHP LAser Jet M1005 MFP Windows 10

[VinayB]

Hi,

Previously when i was using windows 8 was using this printer with two sided printing whithout any issues but after updating to Windows 10 its not at all available

Please guide me step by step how to enable it

Thank you

[ShlomiL]

Hi,
Make sure the Automatic Duplexing option is enabled:

Enter Control Panel > Devices and Printers.
Right click the printer icon, then click Printer Properties.
Click the Device Settings tab.
Set the Automatic Two-Sided Duplex Accessory as installed and click OK to save the change.

Now Automatic Duplexing should become available within the Layout tab.

Regards,
Shlomi

[LAVANYA1]

hello,

let me tell you- there is no automatic duplex option in m1005 printer, but then u can do the manual duplex printing.

if you want the settings please let me know.

I am an HP Employee

If you found this post helpful, you can let others know by clicking the “Accept as Solution” button. You can also show your appreciation, with a kudos, by clicking the “Thumbs up" button!

[VinayB]

Yes please help me with the manual settings

[VinayB]

[LAVANYA1 · Accepted solution]

hello, vinay

well to start with

1. go to device and printers>select printing peferences >select finishing>enable print on both sides> apply ok.

2. go to device and printers>select printing properties>device settings>allow manual duplex>apply ok.

print the document- it should print.

I am an HP Employee

If you found this post helpful, you can let others know by clicking the “Accept as Solution” button. You can also show your appreciation, with a kudos, by clicking the “Thumbs up" button!

[VinayB]

Thanks a ton Lavanya , You have solved a mojor issue for me, In my business I need much duplex printing and i have tried to rectify the issue searching several blogs but failed

Finally your solution helped, Thank you

[LAVANYA1]

That's great !!!

your most welcome vinayB