EPrint error

[Fbah]

im trying to do the eprint as discribed to send email to my printer email but always giving me error mail failed

[Riddle_Decipher]

@Fbah I suggest you go through the below steps to set-up the ePrint feature, and ensure you are connected to a network:

Step 1: Check the printer status

To receive ePrint jobs, the printer must be on and connected to the Internet.

1. Turn the printer off and on again to clear any existing problems.

2. Print a test page from a device on the same local network. If a connection error displays or the printer is not found, there is a network connection issue. See the Troubleshoot the printer network connection section for more information.

3. Confirm Web Services is enabled on the printer.

   • Printers with a touchscreen or LCD display: Touch the HP ePrint icon, and then touch Settings. Or navigate to the Web Services menu under Network Setup or Wireless Settings. The Web Services status displays with enable instructions.

   • Printers without a touchscreen or LCD display: Print a network configuration or self-test page to obtain the printer IP address, and then enter it in a web browser address bar to open the Embedded Web Server. Click the Web Services tab to turn on the feature.

     Go to Turning On Web Services for more information.

4. Send an ePrint job. If the issue persists, continue to the next step.

FOR DETAILS & FURTHER INSTRUCTIONS, USE THIS LINK: CLICK HERE & SKIP TO STEP 2

(By the end of this article all the issues should be resolved)

Let me know how that pans out,

If you feel I was helpful, simply click on Accept as Solution to help the community grow,

That said, I will have someone follow-up on this to ensure you've been helped,

Just in case you don't get back to us within 24 - 48hrs, and have a good day, ahead.