HPLJ M452dn - 59.F01 Error

[WillySTL]

Have an M452dn deployed that is few month outside warranty.   User can print few pages then it throws a 59.F01 error on the unit.  Only way to get it to print again is draining power from printer and booting up again.  Works for a few pages then goes right back.   Any suggestions on that error? Thanks in advance for any help all.  Thanks!

[John_Getzke]

See pages 124 and 125 of the M452 Troubleshooting Guide:

　

59.XX Error, Turn off then on

Description

The product has experienced an error with one of the internal motors.

59.30 = Fuser motor startup error

59.40 = Fuser motor rotation error

59.70 = Black developer motor startup error

59.71 = Cyan developer motor startup error

59.72 = Magenta developer motor startup error

59.73 = Yellow developer motor startup error

59.80 = Black developer motor rotation error

59.81 = Cyan developer motor rotation error

59.82 = Magenta developer motor rotation error

59.83 = Yellow developer motor rotation error

59.90 = ITB motor start error

59.A0 = ITB motor rotation error

59.C0 = Developer motor rotation error

59.F0 = Transfer alienation failure

Recommended action

Reset the printer:　

Turn off the power by using the power switch, and then wait at least 30 seconds.

Turn on the power and wait for the product to initialize.

　

If you are using a surge protector:

Power off the printer.

Remove the surge protector.

Plug the product directly into the wall socket and turn the product power on.

　

If the error persists, replace the appropriate motor: Error Code	Motor Description	HP Part #
59.30, 59.40	Fuser Motor Assembly	RM2–7348–000CN
59.70, 59.71, 59.72, 59.73, 59.80, 59.80, 59.82, 59.83 59.C0	Developing Motor Assembly	RM2–7344–000CN
59.90, 59.A0, 59.FO	Drum Motor Assembly	RM2–7342–000CN