Help to extinguish "redial pending" on failed fax attempt

[theSTREAK]

Hello Hip HP FAM!! Ol' Goat needs to know how to extinguish "Redial pending" following failed FAX attempt....have only a

DSL line at home. Took fax to print shop...got 'er done.

[Sayed_S]

The redial-on-no-answer setting selects the number of times the fax accessory redials if the number
dialed does not answer. The number of retries is either 0 to 1 (used in the U.S.) or 0 to 2, depending on
the country/region setting. The interval between retries is set by the redial interval setting.

You may follow below steps on the Printer:

Set the dialing mode
1. On the control panel, scroll to and touch the Administration icon to open the Administration menu.
2. Scroll to touch Initial Setup to open the initial setup menu.
3. Touch Fax Setup to open the fax setup menu.
4. Touch Fax Send Settings and use the down arrow key to scroll to Dialing Mode.
5. Touch Dialing Mode to see the dialing mode settings.
6. Touch Tone (default) to set the fax for tone dialing, or touch Pulse to set the fax for pulse dialing.
7. Touch Save.

Set the redial-on-busy setting
1. On the control panel, scroll to and touch the Administration icon to open the Administration menu.
2. Scroll to touch Initial Setup to open the initial setup menu.
3. Scroll to touch Fax Setup to open the fax setup menu.
4. Touch Fax Send Settings and use the down arrow key to scroll to Redial on No Answer.
5. Touch Never or Once.
6. Touch Save.

Although I am an HP employee, I am speaking for myself and not for HP.
--Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"