How to Cold Reset HP Laserjet m1132 mfp printer

[Hemant_832003]

Please tell me how can I cold reset Laserjet M1136 MFP printer. It is showing E-eight error on display.

[Jeet_singh]

@Hemant_832003,

Thank you for showing your interest in HP Support Forums. It is a great place to find the help you need, from other users, HP experts, and other support personnel. I see from your post you need assistance in resetting your HP LaserJet printer. Don't worry I'll be glad to assist you.

To provide you with an accurate solution, I'll need a few more details:

Have you recently made any changes on the printer before the issue started?

Did you try to do a hard reset on the printer?

In the meantime, let's try these steps here: 

Perform a Hard reset on the printer and make sure that the printer is connected directly to the wall outlet and not to the surge protector.

With the printer turned on, disconnect the power cord from the rear of the printer and also unplug the power cord from the wall outlet.

Remove USB cable, if present.

Wait for 2-3 minutes, press and hold the power button on your printer for about 30 seconds to remove any additional charge.

Now plug back the power cable straight to a wall outlet without any surge protector or an extension cord and then plug back the power cord to the printer.

Turn on the printer and wait till warm-up period finishes and the printer is idle.

If the issue persists, I am sending you a private message with the steps to reset the printer. Please check the mailbox icon at the top-right corner of this screen.

Please check your Private message icon on the upper right corner of your HP Forums profile,

Next, to your profile Name, you should see a little blue envelope, please click on it.

I hope this helps resolve this issue completely,

Regards,

[Howyd]

how i can restart my laser jet printer

---

@Hemant_832003 wrote:

Please tell me how can I cold reset Laserjet M1136 MFP printer. It is showing E-eight error on display.

---