How to reset laser jet pro map m127fw

[eyoun1711]

My printer is stuck in a fax mode. Keeps printing the same page over and over again. Need help in reset

[Jeet_singh]

Hi @eyoun1711,

Thanks for engaging in HP support Forums! This is a wonderful location to converse with the community, get assistance and find tips! I understand you need assistance in resetting the printer. Don't worry I'll be really glad to help you with this.

Let's start off by performing a Hard reset on the printer and make sure that the printer is connected directly to the wall outlet and not to the surge protector.

With the printer turned on, disconnect the power cord from the rear of the printer and also unplug the power cord from the wall outlet.

Remove USB cable, if present.

Wait for 2-3 minutes, press and hold the power button on your printer for about 30 seconds to remove any additional charge.

Now plug back the power cable straight to a wall outlet without any surge protector or an extension cord and then plug back the power cord to the printer.

Turn on the printer and wait till warm-up period finishes and the printer is idle.

If your printer connected wirelessly, make sure to temporary connect the device with USB and then follow the link to check for the latest firmware update if available for your printer, using this website.

If you have followed the steps suggested and still having the issue. I would suggest the next step would be to perform an advanced reset on the printer. 

I am sending you a private message with the steps to reset the printer. Please check the mailbox icon at the top-right corner of this screen.

Please check your Private message icon on the upper right corner of your HP Forums profile,

Next, to your profile Name, you should see a little blue envelope, please click on it.

Please reply back on the public post as this Private message box is not monitored.

I hope this helps resolve this issue completely,

Regards,

[efournier]

Thank you that worked for me.