How to solve 59.C0 error for HP LaserJet Pro 200 M276nw

[Matti_]

After new update of the HP LaserJet Pro 200 M276nw, I'm getting the 59.C0 error. Can somebody help me to solve this?

[sandytechy20]

@Matti_

Welcome to HP support community.

Perform a power reset

1. Turn on the printer, if it is not already on.
2. Wait until the printer is idle and silent before you continue.
3. With the printer turned on, disconnect the power cord from the rear of the printer.
4. Wait at least 30 seconds.
5. Plug back the power cable straight to a wall outlet and printer without any surge protector.
6. Turn on the printer.

Update the printer firmware

Here are the steps:- Click here

I hope that helps.

To thank me for my efforts to help you, please mark my post as an accepted solution so that it benefits several others.

Cheers.

[east2100]

It's a hardware problem which you can't expect a reset or NVRAM to resolve it.

You need to take it apart and get it fixed 

Check the link it'll help.

https://h30434.www3.hp.com/t5/LaserJet-Printing/Error-59-co/m-p/7506285#M390366

https://h30434.www3.hp.com/t5/LaserJet-Printing/59-C0-Fout/m-p/6979769#M361955