I have o problem with my printer,

[Acalin]

I have a problem with my HP Laser Jet Pro P1606 dn

All three lights, Attention, ready, and go  are on and i cant print.

Can you help me?

[VikramTheGreat]

Hi @Acalin,

Welcome to the HP Support Community.
 

Thank you for posting your query. I will be glad to help you.

I understand how frustrating this is when all three lights (Attention, Ready, and Go) are solid on your HP LaserJet Pro P1606dn; it usually means the printer is stuck in an error state or firmware lock.

Here’s the recommended fix:
Step 1: Power Reset

• Turn off the printer.
• Unplug the power cord for 60 seconds.
• Plug it back in and turn it on.

Step 2: Check for Paper or Jam

• Open the input and output trays.
• Remove any paper stuck inside.
• Make sure the paper path is clear.

Step 3: Reset Printer

• Press and hold the Go button for 5–10 seconds until the lights cycle.
• This forces a cold reset.

Step 4: Update Firmware

• Go to: 👉 HP LaserJet Pro P1606dn Printer | HP® Support
• Download and install the latest firmware update.

Step 5: Check Connection

• If using USB, try a different port and cable.
• If using a network, confirm the Ethernet cable and IP settings.

Step 6: If Still Stuck

• Run HP App ( If Supported): 👉 HP App – For HP Printers, Laptops, and Tech Accessories | HP® Official Site
• If the printer fails diagnostics, it may need service.

I hope this helps.

Take care and have an amazing day!
 

Did we resolve the issue? If yes, please consider marking this post as "Accepted Solution" and click "Yes" to give us a helpful vote - your feedback keeps us going!

Regards,

VikramTheGreat