Is 4.3 inch control panel a possible replacement for 2.7 inch control panel?

[harrypomango]

So I have an HP laserjet managed e60065 and it came stock with the 2.7 inches non touch screen colored display with 10 keys keypad and Hp also releases same printer with the 4.3 inches touch screen display so is it possible that i remove that 2.7 inch one and put instead the 4.3 one even though my stock one was the 2.7. I am doing this because mine broke and i was looking for a replacement and found the 4.3 inch one much cheaper so might as well. 

and as you can see in the screenshots both versions use same connectors and fit in same place and hp itself says both models support e60065 but it didnt state anything regarding wether if it was stock 2.7 it would be able to support 4.3 and vice versa.

[Repairatrooper]

If you check HP Part Surfer you may be able to cross-reference. I have tried 4.3 screens from a different series with the same connectors on a 2.7" model and they did not work properly. Sorry cannot confirm if that was a model difference or if you would have the same issue with another one. The problem I had was the resolution and sizing did not line up, so there may be some hard coding in the island of data or on the formatter that dictates what screen will work.