• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
We have new content about printers, Click here to check it out!
HP Recommended
Laserjet pro MFP M277dw

My laser Jet printer has started to leave black streaks down the side of the page when it prints.  I have tried using the cleaning junction but it still leaves streaks.  Anyone know how to rectify.  Its only just over a year old!!

1 REPLY 1
HP Recommended

Can you post a sample? Could be cartridge, remove the black cartridge and look at the blue roller on the bottom, it should be clean with no residue on it. If there is debris then cartridge is probably bad. May be a problem with the transfer belt.  Remove all cartridges and look at the Mylar belt in the cavity where cartridge drawer slides in. It should have no toner on it. If it does then check for paper stuck may be smearing toner. Or the toner waste bin could be full and toner is backing out onto the belt. Last possibility is a failed fuser. These are pretty hard to see on this model.

If you find the information provided useful or solves your problems, help other users find the solution easier by marking my post as an accepted solution. Clicking "yes" on "was this reply helpful" also increases the chances that this solution will help others.
I am a volunteer, offering my knowledge to support fellow users, I do not work for HP nor speak for HP.



† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.