LaserJet M607 Paper Orientation for checks

[GradyMA]

I changed the paper type to "Letterhead" and checked the box for "Reverse Page Order" and that appears to let me print Face Up Feet First with checks that are "reverse" ordered in the box.  i.e. highest check number is on the top.

Does the paper type selected have impact on the other options, it appears they do...

[kbacpamn3]

Hi:  We just purchased this printer.  We're having the same issues with check printing.  Did you figure out a solution for this?  Thanks,  Karl

[GradyMA]

Honestly, I spent an entire day printing tests, changing options and printing again.

I eventually got what we needed by changing settings to "Letterhead Papertype" and "Reverse Order" and placing the checks in the printing tray "FACE UP/FEET FIRST".

I hope that helps, I can't find any other notes on the various printout from that day.

[kbacpamn3]

Thanks for the help.  Our IT guy installed the driver again and we called it "Checks" so we could save the special configuration and not have to worry about it impacting other printing accidentally or forgetting to configure when we do a check run.  All we had to do was check the reverse order and it worked.  Just wanted to share if that helps.  But if what you have works - don't fix it 🙂

[Ken-P]

We're using the Universal Drivers and Win 10. In Properties, under Printing Defaults, the Finishing tab, under Orientation, check the box "Rotate by 180 degrees". You can also use Printing Preferences instead of Properties/Printing Defaults.