-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Printers
- LaserJet Printing
- Laserjet M1217 installation fails on latest W10 version

Create an account on the HP Community to personalize your profile and ask a question
07-29-2019 10:12 AM
Hi,
I have seen a couple of other posters on this board having trouble getting the laserjet M1217 drivers to work with Windows 10:
I have confirmed that the W10 drivers executable for the M1217 does download from HP's site, but the installation never completes correctly. I think this may be a driver issue with the latest version of W10.
My M1217nfw printer works fine with an older version of W10 (64 bit, Home, v1803). However I am unable to get it working properly on my new W10 machine (64 bit, Enterprise v1809).
On the new W10 v1809 machine I am able to manually install the drivers by browsing to this folder on my PC which is created by the executable install package:
C:\Windows\System32\DriverStore\FileRepository\hpm1210.inf_amd64_55cf96b3893cb6ca
However, once I install the drivers they cause various errors: "Function Address 0x80072c5c caused a protection fault. Some or all property pages may not be displayed."
I have the printer partially working using a generic Microsoft print driver, but have lost some key features, since this driver is not as fully featured as the HP one. Per this page the full HP driver should work with Windows 10:
https://support.hp.com/us-en/document/c04658195#Install_driver_from_HP_website
Can you please help?
Best regards,
Ben
Solved! Go to Solution.
Accepted Solutions
08-02-2019 04:48 PM
Use HP Print and Scan Doctor to check connectivity
Download a special version of HP Print and Scan Doctor.
-
Download HP Print and Scan Doctor.
-
Run HPPSdr.exe from the download location on your computer.
-
Once HP Print and Scan Doctor opens, click Start, and then select your printer.
-
If your printer is not in the list, turn it off and on and then click Retry.
-
If there is a connection problem, follow the instructions in HP Print and Scan Doctor.
-
-
If a screen prompts you to turn on printer updates, click Yes.
-
If a screen prompts you to make your printer the default printer, click Yes.
-
Try to print.
If the issue persists, I recommend you delete the driver at the root level and Install the drivers, follow the steps below:
Remove the USB if connected
1.) In Windows, search for and open Programs and features
2.) Select your HP Printer
3.) Select Uninstall
4.) In Windows, search for and open Devices and printers
5.) In the Devices and Printers windows look for your HP printer. If you see it listed right-click on it and choose `Delete' or `Remove Device'
6.) Open up the run command with the "Windows key + R" key combo.
7.) Type printui.exe /s and click Ok. (Note: there is a space in between "printui.exe" and "/s")
8.) Click on the "Drivers" tab
9.) Look for HP Printer driver. If you see it Click on it and click Remove at the bottom
10.) Select Ok
11.) Select Apply and Ok on the Print Server Properties windows
12.) Close Devices and Printers
Then, Click on this link: https://support.hp.com/us-en/drivers/selfservice/hp-laserjet-pro-m1217nfw-multifunction-printer-seri... to download and install the Full Feature Software and Drivers.
Try to print.
Keep me posted, how it goes!
If the information I've provided was helpful, give us some reinforcement by clicking the Accepted Solution and Kudos buttons, that'll help us and others see that we've got the answers!
Have a great day!
Cheers:)
Raj1788
I am an HP Employee
07-31-2019 10:40 AM
Welcome to the HP Support Community.
Let's try this:
Click the Start button on the desktop screen and type %temp% into the search bar, then open the shown Temp folder.
Open the latest HP installation folder which begins with 7z (e.g. 7zS1234)
Double click HpSetup.exe
Let me know if this helps.
If the information I've provided was helpful, give us some reinforcement by clicking the Accepted Solution button, that'll help us and others see that we've got the answers!
Thanks!
Have a great day!
I am an HP Employee
07-31-2019 06:58 PM
Hi Betty,
I had tried running the download package several times before and it fails every time. When I follow your specific instructions below I get the following error: "Configuration Failure. Unable to continue." I also tried Run as administrator but the results are the same.
Thanks for your help - I can't use the the scan or manual duplexing functions with the generic driver I am using as a workaround.
Best regards
Ben
08-01-2019 09:30 AM - edited 08-01-2019 09:32 AM
You can scan using one of the below methods:
HP Scan and Capture app (Windows 10, 😎: Scan documents or photos from the printer or webcam. A full feature print driver must be installed on the computer. For more information, go to Using the HP Scan and Capture App (Windows 8 and 10).
Windows Scan app (Windows 10, 😎: Search the Microsoft Store for windows scan to find and install this app.
Microsoft Paint (All Windows versions): Search Windows for paint, and then open the Paint desktop app. Click File or the menu icon
, and then click From scanner or camera.
Windows Fax and Scan (All Windows versions): Search Windows for fax to open the desktop app, and then click New Scan.
Webscan utility (network printers): Obtain the printer IP address and use it to open the printer's Embedded Web Server (EWS) in a web browser. On your printer's website, click Webscan on the Scan tab.
Let me know if this helps.
If the information I've provided was helpful, give us some reinforcement by clicking the Accepted Solution button, that'll help us and others see that we've got the answers!
Thanks!
I am an HP Employee
08-01-2019 10:05 AM
Hi Betty,
The first three methods you suggest require a working print driver, which is the thing I do not have! When I log onto the printer's web server, there is no option for a web scan.
I am looking for a working Windows 10 driver for my printer. The drivers and installation packages from HP do not work with the latest release of W10.
Thank you!
Ben
08-01-2019 10:15 AM
If you have installed the Windows built-in driver then you can use the one the above methods to scan: https://support.hp.com/in-en/document/c01796879
I am an HP Employee
08-02-2019 08:28 AM
Hi Betty,
I followed the instructions at the link you sent, uninstalled the printer and resintalled. No scan options are available in Windows as the instructions indicate there should be. There are also no options for manual duplexing, just regular printing.
Here are the details of the driver that W10 installs. Is there another generic driver that will work?
Best regards
Ben
Device SWD\PRINTENUM\{429AC5F9-3815-4BC7-A82E-F119B086C58B} was configured.
Driver Name: printqueue.inf
Class Guid: {1ed2bbf9-11f0-4084-b21f-ad83a8e6dcdc}
Driver Date: 06/21/2006
Driver Version: 10.0.17763.1
Driver Provider: Microsoft
Driver Section: NO_DRV_LOCAL
Driver Rank: 0x0
Matching Device Id: PRINTENUM\LocalPrintQueue
Outranked Drivers: c_swdevice.inf:SWD\GenericRaw:00FF3001
Device Updated: false
Parent Device: SWD\PRINTENUM\WSD-cfe00ad5-cd53-4616-9c95-300ae36e30e9
08-02-2019 04:48 PM
Use HP Print and Scan Doctor to check connectivity
Download a special version of HP Print and Scan Doctor.
-
Download HP Print and Scan Doctor.
-
Run HPPSdr.exe from the download location on your computer.
-
Once HP Print and Scan Doctor opens, click Start, and then select your printer.
-
If your printer is not in the list, turn it off and on and then click Retry.
-
If there is a connection problem, follow the instructions in HP Print and Scan Doctor.
-
-
If a screen prompts you to turn on printer updates, click Yes.
-
If a screen prompts you to make your printer the default printer, click Yes.
-
Try to print.
If the issue persists, I recommend you delete the driver at the root level and Install the drivers, follow the steps below:
Remove the USB if connected
1.) In Windows, search for and open Programs and features
2.) Select your HP Printer
3.) Select Uninstall
4.) In Windows, search for and open Devices and printers
5.) In the Devices and Printers windows look for your HP printer. If you see it listed right-click on it and choose `Delete' or `Remove Device'
6.) Open up the run command with the "Windows key + R" key combo.
7.) Type printui.exe /s and click Ok. (Note: there is a space in between "printui.exe" and "/s")
8.) Click on the "Drivers" tab
9.) Look for HP Printer driver. If you see it Click on it and click Remove at the bottom
10.) Select Ok
11.) Select Apply and Ok on the Print Server Properties windows
12.) Close Devices and Printers
Then, Click on this link: https://support.hp.com/us-en/drivers/selfservice/hp-laserjet-pro-m1217nfw-multifunction-printer-seri... to download and install the Full Feature Software and Drivers.
Try to print.
Keep me posted, how it goes!
If the information I've provided was helpful, give us some reinforcement by clicking the Accepted Solution and Kudos buttons, that'll help us and others see that we've got the answers!
Have a great day!
Cheers:)
Raj1788
I am an HP Employee
08-03-2019 06:46 AM
Hi Raj,
Thanks for the additional suggestions. Ultimately they were unsuccessful. Here's what I did and the results I got:
I ran the HP Print and Scan Doctor from the ftp link you sent. The utility finds the printer running on the generic Microsoft driver (details in my previous post):
The utility states it is unable to communicate with my printer (not unexpected since I am using a generic driver), and to click Retry for a more advance search. This brings up the following:
In the screenshot above, you can see the actual printer on my LAN, but with no drivers installed. When I try to connect to this printer I get the following:
This just gives me a link the same driver download page that you did:
I know this driver package fails to install, since this is the very first thing I did when trying to install the printer on my new PC!
Next I followed your instructions to uninstall everything. I removed the following Apps:
I removed the following HP drivers and the generic MS driver I was using:
Next I went to the link you provided:
I download the installation package, ran it and this is all that happens:
Once the package extracts, it fails somewhere and I have no printer installed!
This is exactly the initial problem I had, and other posters on this board have had. Please see my original post for details. Thanks again for your help so far, but what do I try next?
Best regards,
Ben
08-03-2019 04:13 PM
Appreciate all your time and efforts!
I would personally suggest you contact our HP Support for further assistance.
Click here: https://support.hp.com/us-en/contact-hp?openCLC=true
Make sure you select the Country and Region.
Keep me posted on further assistance. Hope that helps!
Have a great day ahead!
Raj1788
I am an HP Employee