Laserjet M630 MFP error 30.03.45

[Michel876]

I have an error 30.03.45 on my M630 MFP.  I have change the flatbed, update the firmware to 3.9.5 and always the same error. Somebody have any idea.

[Repairatrooper]

The service documentation indicates that you should first replace the SCB cable and if that fails replace the SCB. There have also been instances of this error being caused by jammed paper in the ADF.

[ALS-77]

Here are the steps recommended for that error, some of which you've already done:

1. Turn the printer off, and then on.
2. Upgrade the firmware.
3. Reseat all cables and FFC’s in the SCB.
4. Check the event log for other scanner errors. If there are other errors present, resolve those errors.
5. Replace the SCB.
6. Replace the image scanner kit.
7. If the error persists, replace the document feeder.

[Michel876]

The SCB and the cable have already changed in the same time that the flatbed.  My next step is to pass to the firmware 3.9.5 to 4.10.  I let you know if it's work

[Michel876]

I have put 4.10 firmware, change ICB and formatter. Same problem.

[Jaysss]

Wires and connectors that lead down from the top scanner bed through the hinges connected to a circuit board on the main back chasses , reseat them all , worked for me

[Michel876]

all ready done, no success