• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
We have new content about printers, Click here to check it out!
Locked

‎11-30-2017 10:23 AM - edited ‎11-30-2017 10:25 AM

HP Recommended
Product: Pro 200 MFP M276nw
Operating System: macOS 10.12 Sierra

I have replaced all the Original Toners of the printer and the printing comes out with certain black spots in vertical left side only, I have done the automatic cleaning of the printer and follow the same problem any suggestion?FaceFaceBack same SheetBack same Sheet

1 person had the same question
1 ACCEPTED SOLUTION

Accepted Solutions

‎12-01-2017 08:39 AM

HP Recommended

Looking at your samples the fuser unit is most probably dirty or damaged.Remove the fuser and clean   the rollers for a start.Then you will most probably be able to see if the roller are damaged.Hope this helps.

I am A certified Copier Technician.
It is so nice to give some help where possible and the forum is a great idea Thank You.Sometimes a picture speaks louder than words to find a solution.Should you find my help use full just give some credit for my effort please.
.Thank You.Copier-Pro
If you found this post helpful, you can let others know and also show your appreciation by clicking the “Accept as Solution”button, “Thumbs up" button!

#################################################################
I'M NOT AN HP EMPLOYEE AND DO ANSWER THESE QUESTION ON MY OWN BEHALF.
#################################################################

View solution in original post

2 REPLIES 2

‎12-01-2017 08:39 AM

HP Recommended

Looking at your samples the fuser unit is most probably dirty or damaged.Remove the fuser and clean   the rollers for a start.Then you will most probably be able to see if the roller are damaged.Hope this helps.

I am A certified Copier Technician.
It is so nice to give some help where possible and the forum is a great idea Thank You.Sometimes a picture speaks louder than words to find a solution.Should you find my help use full just give some credit for my effort please.
.Thank You.Copier-Pro
If you found this post helpful, you can let others know and also show your appreciation by clicking the “Accept as Solution”button, “Thumbs up" button!

#################################################################
I'M NOT AN HP EMPLOYEE AND DO ANSWER THESE QUESTION ON MY OWN BEHALF.
#################################################################

‎11-26-2018 04:37 PM

HP Recommended

I have the same issue, but the page does not come out streaked, as in the photo, but with small black dots, spaced about 1 inch apart and on the right hand side of the paper.  How does one clean the fuser?  Also, how does one run the "automatic cleaner"?  Thanks

Warning
Be alert for scammers posting fake support phone numbers and/or email addresses on the community.
If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.
Didn't find what you were looking for? Ask the community
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.